Mash 0 Report post Posted July 2, 2009 Hey Just wondering on a price to convert an auto 320i to a manual 320i.. Just looking for estimate price Quote Share this post Link to post Share on other sites
Nobimmer 694 Report post Posted July 2, 2009 Anywhere from $500-$1200 and DIY. Would wanna swap some of the consumables while it's out too. Ask Mike, he will probably have something. Quote Share this post Link to post Share on other sites
APT 179 Report post Posted July 2, 2009 Depends if you can do it yourself or pay someone to do it.. For the kit itself is about 600 - 1000, someone on heres selling one for $500, then you have to add labour up on top of that. i got my whole conversion done by synthe (323e30) for $1100 all up incl. labour give him a PM and see how you go Quote Share this post Link to post Share on other sites
Boost Junky 1 Report post Posted July 2, 2009 $600-$1000 for an E30 maybe but doubt an E46. Presuming thats what you own going by your username. Help to put a few more details up mate Quote Share this post Link to post Share on other sites
Mash 0 Report post Posted July 2, 2009 Yeah no this for my project e30 that i have going on , says e30 in the topic.. Quote Share this post Link to post Share on other sites
Boost Junky 1 Report post Posted July 2, 2009 Haha blonde moment just realised there was E30 slotted in the title Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted July 2, 2009 Check with Ray @HELLBM... I think he does drive in , drive out for about $1,500 Quote Share this post Link to post Share on other sites
BM WORLD 1258 Report post Posted July 2, 2009 you might want to think about doing a 2.5L M20 while your at it . not a lot more work realy . Quote Share this post Link to post Share on other sites
APT 179 Report post Posted July 2, 2009 I agree if yo have enough money go for the 2.5 m20 i regret not doing it now Quote Share this post Link to post Share on other sites
Carl 3 Report post Posted July 2, 2009 See my bimmersport article on doing it yourself Quote Share this post Link to post Share on other sites
tibbs.james 1 Report post Posted July 8, 2009 $700 is about the most you would want to pay for a complete kit. need to factor in most kits go for around $500-$600 and after that you should use a new clutch kit and have the master & slave cylinders rebuilt or replaced. Most kits don't seem to include the gear lever surround or a gear knob If all the parts were provided i would thing its a good 4-5 hours work for somebody. apply standard rates of $70 per hour and that's about what the labor is worth. Quote Share this post Link to post Share on other sites
