e30 318is

[pommy 33]

Hi all,

I was wondering If anyone Knows of any good mods to make my 318is get some extra ponies!

apart from exhaust/pod/full service!

was thinking maybe a schrik cam?

thanks.

[mark247 39]

A few ideas a friend of mine came up with

Edited April 19, 2010 by Mark247

[Guest Ari Gold]

Jim Conforti Chip

Change to a single mass flywheel. The factory one weighs 28lbs

Change to 4.27 (E30 318i verts) or 4.45 (E36 318iA's) rear end

Change the muffler. They've got a 2.25" system from factory that's choked out by the muffler

Bore the throttle body out 3mm to 57mm

They've got adj cam timing from factory too, 5 degrees advance on the intake seems to be a figure bandied about quite often. Leave the exhaust

Edited April 19, 2010 by Ari Gold

[Venatus 2]

damn im keen for a m40 turbo, or even just an m40 in my 318. damn m10s...

[_ethrty-Andy_ 2132]

.. or 4.45 (E36 318iA's) rear end..

Also factory in E30 320i Automatics. I have one available too

damn im keen for a m40 turbo, or even just an m40 in my 318. damn m10s...

Thats an M42

[pureboiracer 0]

Also factory in E30 320i Automatics. I have one available too

only sometimes.. for some reason e30 m20s seem to have all sorts of random diffs in, i have seen a 320i manual with a 3.4 a 320i auto with a 3.6 and so on.

[NZ318is 4]

Try this lots a good info

http://bmwnut.blogspot.com/2006/04/1991-e3...mance-mods.html

[pommy 33]

Thanks for your feedback.

that web link had alot of great info!