VeeDub 0 Report post Posted October 17, 2010 I am selling my set of BBS RS001s 15x7 et25 4x100 They are factory gold centres and barrels with silver bolts and lips. The paint on them is rough, brake dust and years of not being cleaned has eaten into it. Perfect set for a refurb: - Kerbing is minimal and you could definitely fix at home with a file. - All seem to be running true with no bends, buckles or cracks in barrels. - Lips would be easy to take off and polish at home as they aren't a big drop lip. If you wanted to widen these I have a couple of contacts who each may sell 2x brand new 2.5" lips. They brought them for their VWs and they poke too much but on an e30 the 2.5" lips are perfect. Feel free to check them out and test fit them, can be done in Freemans Bay. $990. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 19, 2010 Are BBS RS a thing of the past? Am open to sensible offers on these. These are the ultimate rim for any e30! Quote Share this post Link to post Share on other sites
KRZY-E30 0 Report post Posted October 19, 2010 I'd Really Like To Buy These For My 325i As I Too Think They Are The Ultimate Wheels For The E30! At The Moment E30BM Is Wearing 15x7 Borbets. Wanting To Sell Them But Currently On Holiday. So I Will Keep Looking On This Post Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 24, 2010 $900 Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 25, 2010 Out they go, highest bidder takes them. http://www.trademe.co.nz/Browse/Listing.aspx?id=327112649 Quote Share this post Link to post Share on other sites
dubman 39 Report post Posted October 25, 2010 center caps? Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 25, 2010 No sorry dude Quote Share this post Link to post Share on other sites
gouba 0 Report post Posted October 25, 2010 Any chance of grabbing those lips off your mate? A finders fee can be organized Quote Share this post Link to post Share on other sites
APT 195 Report post Posted October 25, 2010 Yea i 2nd that keen on the lips for a workmate, PM me. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 25, 2010 Yea i 2nd that keen on the lips for a workmate, PM me. Sorry guys they're not available anymore. You can get them cheap as chips on ebay though. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 26, 2010 (edited) I also have these for sale. I'll give it a couple of days before I chuck them on trademe. There would be no need to refurb this set as they're in pretty good condition (unless you're hugely anal). They come with factory half height centre caps which are pretty uncommon and create the illusion of more dish. Two wheels have some light kerbing - approximately a 10cm patch on each. Redrilling would be difficult but possible, adapting would be easier and cheaper. Please note that in the pics the very right wheel looks like it has a ding on the inner rim, there was a weight stuck on there and the tyre sh*t has left a mark around where the weight was. Staggered 16x7 & 16x8 RS037 16x8 et24 5x114.3 RS174 16x7 et33 5x114.3 $700 Edited October 26, 2010 by VeeDub Quote Share this post Link to post Share on other sites
gouba 0 Report post Posted October 26, 2010 Those are pretty sexy Quote Share this post Link to post Share on other sites
sascha 17 Report post Posted October 26, 2010 Are the insides of the 16" ones flat, as opposed to scalloped? Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted October 26, 2010 Are the insides of the 16" ones flat, as opposed to scalloped? Flat backed jap spec RS are very rare, only 2 models of them as I learnt on the weekend. These are scalloped so you could send the centres to Germany to fill and redrill, or if you weren't too worried with structural integrity you could machine about 10mm off the backs to make them flat and redrill them here. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted November 1, 2010 http://www.trademe.co.nz/Browse/Listing.as...679&ed=true Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted November 1, 2010 Have 1.5" 34 hole 16" lips if anyone wants some cheap. One mirror polished, other not so good. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted November 1, 2010 (edited) Have 1.5" 34 hole 16" lips if anyone wants some cheap. One mirror polished, other not so good. Good to know! That'd probably get them to 8" all round or 8" and 8.5". You can polish lips yourself pretty good at home with wet/dry up to 2000 grit and autosol! Edited November 1, 2010 by VeeDub Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted November 1, 2010 Hah yeah I could polish the unfinished one if anyone wanted to buy em, but the finish on the pro one is perfect. I tend to leave swirls. Quote Share this post Link to post Share on other sites
VeeDub 0 Report post Posted November 8, 2010 Closing in 9 mins! Quote Share this post Link to post Share on other sites
sascha 17 Report post Posted November 8, 2010 Nice! $1200! Quote Share this post Link to post Share on other sites
