DrphTa 5 Report post Posted December 1, 2010 So Ive been tempted for a while... Excuse the dry belt and lose exhaust flange ffs! Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted December 1, 2010 Besides the rattling ... iLike Cars looking bloody awesome too. Quote Share this post Link to post Share on other sites
DrphTa 5 Report post Posted December 1, 2010 Yer, ill get under it tonight and tighten that Sh!t up!. Cheers, im on the fence about lowering. It touches on alot of bumps, driveways as is. An inch lower would look perfect tho Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted December 1, 2010 nice area to live in nice sound too Quote Share this post Link to post Share on other sites
5amchris 45 Report post Posted December 1, 2010 I wouldn't drop it. Yes it might look cool but only until you forget its that low. I do love the look tho! Quote Share this post Link to post Share on other sites
Gaz 1061 Report post Posted December 1, 2010 Sounds hot. If that is the driveway you have to navigate each day then I wouldn't bother lowering it anymore. Looks like a struggle as it is. Quote Share this post Link to post Share on other sites
sweetm3 180 Report post Posted December 1, 2010 Ethan, I’m looking at exhaust options at the moment for my 97 M3. So I would be very interested in a write up and photos of what your done. Would you have before and after dyno results Cheers Quote Share this post Link to post Share on other sites
hybrid 1043 Report post Posted December 1, 2010 Two real options for b32's 2 inch pipes from headers to retain torque or 2 1/2 inch pipes for a little bit of extra power in the top end but at the loss of low end torque (more useful for every day driving) Retain the pipes as straight and long as you can. You can run a center muffler about 1 1/2 meters up to keep it street legal. Back box muffler shouldnt be of the straight through type unless you going for a race setup. You can make extra power by having an X-pipe around after the headers but before the center muffler. This requires a lot of dyno and refabrication time to make work properly to get the correct position. Putting it in the wrong position will decrease power. Quote Share this post Link to post Share on other sites
sweetm3 180 Report post Posted December 1, 2010 Two real options for b32's 2 inch pipes from headers to retain torque or 2 1/2 inch pipes for a little bit of extra power in the top end but at the loss of low end torque (more useful for every day driving) Retain the pipes as straight and long as you can. You can run a center muffler about 1 1/2 meters up to keep it street legal. Back box muffler shouldnt be of the straight through type unless you going for a race setup. You can make extra power by having an X-pipe around after the headers but before the center muffler. This requires a lot of dyno and refabrication time to make work properly to get the correct position. Putting it in the wrong position will decrease power. Hybrid do you mind if I start another topic in Performance and copy your post from here. Quote Share this post Link to post Share on other sites