E36ShoppingTrolley 7 Report post Posted March 14, 2011 Ive tryed bug and tar remover, car wheel cleaner etc and serious elbowgrease but cant get really bad tar stains off. any techniques/products out there to get them off? Quote Share this post Link to post Share on other sites
my_e36 43 Report post Posted March 27, 2011 Are you sure they are tar stain? I've got some black spots on my wheels (not basketweave though) which I think is caked on brake dust. I've tried clay bar which works but too expensive to clay bar a wheel let alone the whole set. (those clay ain't cheap you know) Maybe cheaper to acid strip refurb? Quote Share this post Link to post Share on other sites
Apex 693 Report post Posted March 27, 2011 Paint. Quote Share this post Link to post Share on other sites
Docile 64 Report post Posted March 27, 2011 if its just baked on brake dust i used mothers wheel cleaner. its spray on wait for a few mins then hose off... but i did need to scrub some off with a cloth came out nice. Quote Share this post Link to post Share on other sites
Yankus 0 Report post Posted March 28, 2011 If you leave brake dust on for too long it eventuly eats into the paint. Once that happens its strip and repait time. Have you tried CRC 5.56. I know, I know its a lubricant....but its also good for taking tar off of paintwork. Says so on the side of the can. Quote Share this post Link to post Share on other sites
malus139 5 Report post Posted March 28, 2011 If its brake dust, I used degreaser A LOT of it; Brush and some good old elbow grease Quote Share this post Link to post Share on other sites
cliffdunedin 8 Report post Posted March 28, 2011 I have used De-solve it before which has worked really good with a bit of elbow grease and repetittions. If they are unpainted just get an acid based spray with a water blaster. Quote Share this post Link to post Share on other sites
BreakMyWindow 1874 Report post Posted March 31, 2011 simple green and one of thos 3m scotchbrite pot scrubbers will take it off, but it will also take the paint off if u scrubb too hard. Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted March 31, 2011 Pictures would help this thread. Quote Share this post Link to post Share on other sites
reelGOOD 2 Report post Posted April 3, 2011 Just discovered today while trying to remove 3M tape residue that De-solv-it is the business on tar stains. Had these damn stains for 6 months and hadn't been able to get them off and they came off in 2 seconds with De-solv-it and I barely had to put in any elbow grease. Quote Share this post Link to post Share on other sites
cliffdunedin 8 Report post Posted April 3, 2011 Yep ^^^ it's good stuff! Quote Share this post Link to post Share on other sites
westy 614 Report post Posted April 3, 2011 Turps. Quote Share this post Link to post Share on other sites