URGENT clutch alighnment

[brockie123 31]

hey, could anyone in chch help me out in a big way. i'm after a input shaft from a old getrag 240 or 260 to line my clutch up so i can get this motor in hopfully this weekend.

if you can help flick me a text 027 289 7856 thanks

[*Glenn* 854]

Do it by eye..its not that hard. Line it up centering the splines relative to the spigot bearing with a screw driver. Just put the pressure plate in place and do the bolts up finger tight so you can align it before tightening up the bolts.

[*Glenn* 854]

If you know someone in the area with a lathe...get a piece of dowel or broom handle and machine it to suit the spigot bearing center and clutch plate.. use this

[polley 916]

You can also get universal fit ones from repco etc.

[slowe30 0]

i use a 10mm drill bit with tape wound around till its a snug fit in the splines. dad made it years ago (before i was born i think) and its never failed

[thorburn 120]

+1 for any bit of rod with electrical tape wraped around it

[hotwire 352]

+1 for any bit of rod with electrical tape wraped around it

^^^ Yep or what Glenn said. I have used eyecrometer many times without issue

[nipe 1]

I got that clutch aligning tool if you want to borrow it.

[westy 614]

Real men dont need alignment tools.

[Surge 1]

I got that clutch aligning tool if you want to borrow it.

Gave him mine to borrow.