SRBMW 6 Report post Posted March 6, 2014 (edited) M3 ITB's with tubes and plenum $800 M3 Evo lower arms- more castor than m3 3.0 suit e30 5 stud conversion $380 M3 Evo front hubs with brakes inc rotors and calipers $550 M3 3.0 factory stainless headers suit m50 or m52 upgrade $600 M3 5 speed with crossmember, shifter and fork $750 Getrag 220 box $450 with crossmember, shifter and fork suit 318i 320i 323i 325i 328i 323i/325i e36 manual driveshaft SUIT Getrag 220 box $200 316i 318i e36 manual driveshaft SUIT Getrag 220box $200 e36 manual pedal box with slave,master and clutch line $200 Darren 0211645663 Edited March 24, 2014 by SRBMW Quote Share this post Link to post Share on other sites
E30 325i Rag-Top 2915 Report post Posted March 7, 2014 Do any of those driveshafts fit onto the 98mm diameter guibo / doughnut? Quote Share this post Link to post Share on other sites
SRBMW 6 Report post Posted March 7, 2014 Hmm - have throttle bodies on wish list , Let me know when your ready! Do any of those driveshafts fit onto the 98mm diameter guibo / doughnut? Yes what are your trying to do? what car and diff? Quote Share this post Link to post Share on other sites
E30 325i Rag-Top 2915 Report post Posted March 7, 2014 Need a driveshaft for my E30 race car, S14 with Getrag 265/5 and 4.1 small case diff (pretty sure the diff end is always the same - but could be wrong). Front section to centre hanger needs to be about 630mm, rear section, about 840mm from hanger to flange. Quote Share this post Link to post Share on other sites
euroriffic 602 Report post Posted March 7, 2014 Just doing my homework to find out if they will fit onto an M52 B28 with no dramas Can't remember who on here has done it on their bagged e30 but can be done. Think an adapter plate needs made up and some porting Quote Share this post Link to post Share on other sites
///MPROVD 131 Report post Posted March 7, 2014 Yeah I heard adaptor plates need to fit. the e30 you mentioned had a m54 engine from memory.probs not much performance gains tho Quote Share this post Link to post Share on other sites
Greg111 13 Report post Posted March 7, 2014 Not much gain??? Six throttles all slightly smaller than the one throttle body that's on an M54! Way more air =way more power. Quote Share this post Link to post Share on other sites
///MPROVD 131 Report post Posted March 7, 2014 Just had a quick look for gains on m54 looks like almost 50hp gain thats pretty good not to mention the torque gains but looks pricey to build the adaptor tho could be worth while if you have access to design and development Quote Share this post Link to post Share on other sites
Rooter 0 Report post Posted October 17, 2014 Are the Headers still available ? Cheers Quote Share this post Link to post Share on other sites
