Arron 227 Report post Posted March 28, 2014 Hi all We currently have a e36 S50B32 engine and box on its way down from Auckland to put into our 96 323 race car, all going to play we are picking it up on Sunday afternoon from mainfreight. But...... We have a massive challenge on our hands, we are hoping to have it in and running for Friday night next week because it is the last night of the season. Our plan is to put it in another bmw in we have around at home first so if we do not get it running we can still race. So we are asking for some advice For those of you who have done one of these conversions before have you had any unexpected issues, things that have not bolted straight up or things that need changing. We are aware that the exhausts are different and that we will have to change all the wiring over but are just trying to pre plan how we go about putting this in in a way we can achieve our goal Cheers Arron Quote Share this post Link to post Share on other sites
///MPROVD 131 Report post Posted March 28, 2014 hey the only modifications that i had to do was some ruff custom piping for the 3 heater lines that connect to the firewall for the heater being a race car u might not need this. the other was the coolant tank had to be mounted using scrap metal to the fuse box. also disconnect the steering uni joint as when i did mine i bent it trying to put motor in. Thats all i can think of pm if you have any other questions, good luck. Quote Share this post Link to post Share on other sites
Young Thrash Driver 1020 Report post Posted March 29, 2014 Could always ring Ray at HellBm, I'm pretty sure he's actually a BMW in disguise 021 243 5526 1 Quote Share this post Link to post Share on other sites
Scar-L 0 Report post Posted October 3, 2014 How'd this swap go? Just finished a similar conversion. Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2132 Report post Posted October 3, 2014 also disconnect the steering uni joint as when i did mine i bent it trying to put motor in. lol i discovered that pulling a lowly M42 out! Quote Share this post Link to post Share on other sites