Lucan 196 Report post Posted August 4, 2015 How much are one of these worth? Might have one in Hamilton already but would prefer closer! Also after a gbox crossmember. Cheers, Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2122 Report post Posted August 4, 2015 How much are one of these worth? Might have one in Hamilton already but would prefer closer! Also after a gbox crossmember. Cheers, cant help with the fly wheel but the cross memeber is available from BMW brand new about $20 or so, i had to get one for my manual swap in the cabby, incidentally, most of the manual conversion parts are still available, also the stuff you dont usually get like clutch switch, pedal stop, pads, etc 1 Quote Share this post Link to post Share on other sites
///MPROVD 131 Report post Posted August 5, 2015 (edited) I have a single mass flywheel $50 in west auckland Edited August 5, 2015 by ibboostn Quote Share this post Link to post Share on other sites
Dogballs 102 Report post Posted August 6, 2015 I have a flywheel, plate, disc all in good condition. Off a 320d. $350. Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted August 7, 2015 Didn't realise the cross member was so cheap here. Was looking at one online for around US$30. For a single mass the pressure plate/clutch is different right? Quote Share this post Link to post Share on other sites
_ethrty-Andy_ 2122 Report post Posted August 7, 2015 Didn't realise the cross member was so cheap here. Was looking at one online for around US$30. The dealer is cheaper than online for a lot of things. generally wear/consumable parts are steep sure, but things like panels, mounts, clips etc are cheap as chips, they need to shift them as much as any other company. They have been sitting on a shelf for 25 years.... Quote Share this post Link to post Share on other sites
