Reattaching door card pockets to door card

[qube 3568]

the little pockets on the bottom of the door card on my e36 came off again after fixing it with some glue last time. seems the glue isnt strong enough.

the door pockets have the clips, so need the door pockets to be firmly attached to the door cards in order for the door card to attach to the actual door.

any advice?

[aja540i 1903]

What type of glue did you use?

[qube 3568]

ados i think, cant remember..

[aja540i 1903]

I did mine with araldite epoxy and they have lasted a couple of years so far. You need to scuff it with some 80 grit sandpaper, put heaps of glue on and leave it a week before you put them back in, but it works, i can't remember but i might have even put some fibreglass in there for good luck!

It just means you have to drive around with no door cards for a while so dont park anywhere dodgy!

[BM WORLD 1262]

I always use urethane , sets like rubber sticks to everything.

http://www.holdfast.co.nz/pages/product_details.aspx?pid=20054&cat=19&psid=20054

http://www.supercheapauto.co.nz/online-store/products/Sikaflex-Adhesive-227-310mL.aspx?pid=11079&menuFrom=1021364#Recommendations

[qube 3568]

cool thanks will give urethane a try

[euroriffic 602]

I've used a combo of builders glue, urethane, and a hot glue gun which holds it all together straight away to keep everything sitting tight while the other two go off. Has worked great so far on the top mounting piece of the door card on the m3 so far