M3_Power 636 Report post Posted June 17, 2016 I know this might be a bit of a how long is a piece of string question, but who would be considered to be the best BMW engine builder in the country?? Looking for someone to build me a spare CSL engine with all stock parts. 1 Quote Share this post Link to post Share on other sites
Ace Of Spades 51 Report post Posted June 17, 2016 super stoked with the work taylors did but it was just an m30 Quote Share this post Link to post Share on other sites
Ahmedsinc 414 Report post Posted June 17, 2016 Kayne Barrie would probably have the inside word Quote Share this post Link to post Share on other sites
MISS BM 712 Report post Posted June 20, 2016 Taylor Automotive do all the CCS Porshe/Audi, Auckland City BMW, JC BMW rebuilds. They may cost an arm and a leg, but they're good. Can't comment on 'best' as don't know everyone out there or have had any engines built haha! Just going off our main suppliers at SD. Ray/Kayne also? Quote Share this post Link to post Share on other sites
Nobimmer 694 Report post Posted June 20, 2016 Paramount engineering built a couple for me and were good. Think I initially went there through Kayne and or Ray. 1 Quote Share this post Link to post Share on other sites
M3_Power 636 Report post Posted June 20, 2016 (edited) I am after more empirical evidence and experience over word of mouth really. Anyone can build an engine (heck I can probably do it but I know for a fact I don't have all the right tools or years of experience). In my opinion it's also the equipment that they have at their disposal that often dictate how well an engine is built/rebuilt. Edited June 20, 2016 by M3_Power 1 Quote Share this post Link to post Share on other sites
Driftit 2080 Report post Posted June 20, 2016 (edited) Talk to Kayne. His attention to detail is beyond most I have met. He will send you in the right direction. Or else you can look overseas. VAC have many options. They supply to race teams world wide. Edited June 20, 2016 by driftit Quote Share this post Link to post Share on other sites
Mr Vapour 76 Report post Posted June 20, 2016 Murray at papakura engine specs. Taylor automotive but as it has been said, pricey. I worked for an engine reconditioning part supplier and they are the only two in Auckland that i would use. Quote Share this post Link to post Share on other sites
Neal 545 Report post Posted June 20, 2016 (edited) Taylor is well known in Motorsport as being one of the top engine builders in NZ. Not the same scale as a csl engine, but did the line bored and assembled the long block on my a series turbo. Superb job done by them. Edited June 20, 2016 by Neal Quote Share this post Link to post Share on other sites
Tristan 338 Report post Posted June 21, 2016 Taylor rebuilt my S65 (as mentioned at great expense) but they've done a great job. Sent from my iPhone using Tapatalk Quote Share this post Link to post Share on other sites
