Alpina E36 manual conversion question

[nath 128]

Hi guys

i have purchased a full 420g m3 evo conversion for my E36 Alpina B3 3.2 switchtronic.

Provided I follow through with it some time- will there be issues with programming the ECU, considering it isn't a bog standard ECU or a common one?

I will have a professional undertake the work.

 

cheers

 

nath

[Eagle 1522]

Wouldn't think so as they would surely use the same MS41 DME as BMW (with custom mapping obviously)   

[Gaz 1042]

The standard e36 have a rev hang issue which bothers some people mote than others. Would imagine something similar possibly?

[nath 128]

33 minutes ago, Gaz said:

The standard e36 have a rev hang issue which bothers some people mote than others. Would imagine something similar possibly?

Thanks- this is the kind of thing I won't put up with, it has to be 100% or nothing.

[KwS 2373]

1 hour ago, Gaz said:

The standard e36 have a rev hang issue which bothers some people mote than others. Would imagine something similar possibly?

Mine had that after converting it, even with a light flywheel. Was a real PITA.

[Eagle 1522]

1 hour ago, nath said:

Thanks- this is the kind of thing I won't put up with, it has to be 100% or nothing.

That comes down to the experience\skill of the person doing that side of the conversion. From my understanding rev hang can be eliminated by changing deceleration ignition timing values. I don't why MS41 seems to have an issue over the later MS43, they seem to operate the same auto\manual switch over when coding, clearing adaptions and aligning EWS, maybe some conversions arent doing this?