Eddie

I played with the car on the dyno tonight. The Manual box gave the car an extra 8hp at the wheels @5000 After messing with the AFM and the tps I got afr to 13.2 from 14.3 on wot. Now the car makes just on 100hp @5800

surfacing the flywheel the 6 speed gearbox is in and working

In prep for some up and coming NA battles I ran the car up on the Dyno 80hp at the rears @5000 The car just lost power after that last night I removed the auto box. This morning I machined the flywheel to take the thinner Toyota clutch plate.

4 into1?

I'm trying to make it fit a 15" so we can it on gravel as well

Tonight I started playing around with the old Willwood 6pot calipers I took off my race car and found that if I use a rotor around the 295mm mark I might be able get them to fit inside a 15" wheel

What springs did you end up getting?

This one will be quicker The cost for this gearbox with 6 cylinder fly wheel, starter motor, 6 speed toyota gearbox, bmw bell housing, welding supplies, support bearing, toyota clutch plate, manual pedal box. ( not including time and drive shaft still to be made) $780.00 Edit- I would have sent close to 10hrs making this work

Also I now a have 6 speed box waiting to be installed 1- cut up the bell housings with your angle grinder 2- machine them true 3- weld them together A manual box for the Ti awaits

The car got a new bumper the old the new

After some more measuring the adapter plate idea is out. I'm going to cut the bellhousing.

new bumper

I think that rear offset looks goods

$6000 I hope it goes to someone on here I really don't what to put in on trademe

Thanks but thats only because I don't need to use it the Monday after a trackday

Its happening- its for sale

The build for this 2002? http://www.bimmersport.co.nz/forums/index....showtopic=27929

At this point it looks like I will make an adapter plate and use the toyota starter motor. I have started to make up some templates of both bell housings. Failing that I will get a BMW flywheel and then cut both bell housing and welded the bmw to the toyota. These are cheap gearboxes. Its a mates deal but he said that he sold the last two- flywheel to drive shaft for $600 This box is off a 1g which puts the starter on the same side as the bmw

Yes Toyota box. 3sge flywheel fits to bmw crank with very little mod.

Thanks for all the comments. When so many people have shown interest in this car it makes to harder to part with. I think it has to go I just can't bring my self to say yes. It looks as if I could ask more for it but I am not going to, I think the 5500-6000 marks is fair. I don't really want to put it on trade me, and have tons of Muppet's asking me dumb questions

the 6 speed is here

no lsd, but does have the med case diff

I was thinking about $5500-6000

That could be the case as it is just a pain to store at the moment

I couldn't do that, I would want to be on the track with it