louistan3

After the work is done, I assume it will be running well? What's it lowered on? Does it have AC? How's the interior condition?

It's on trademe as well https://www.trademe.co.nz/Browse/Listing.aspx?id=1119942198

Hi guys, Looking to clear this from my parents garage as its been sitting as I have nowhere else to put this. I've got a supposed M20B23 with no sump. Comes with Manifolds and ECU,etc. Came from a running car as I picked it up from a guy who took it out earlier that day. Was looking to rebuild it and put into my E30 but never had the chance and I have since sold the E30. I can let it go with the stand for $200 ONO if anyone is interested as really want to clear the space. Feel free to ask questions.

I used Toll from Dunedin to Auckland. Takes about 6 days I believe? Depot to Depot. A lot more expensive that Kopua's $300-odd though from memory.

I'd rather sell with the car first haha. PM me an offer and I might consider splitting them though

I was hoping to do more but this is some of the work (which wasn't updated often unfortunately)... http://bimmersport.co.nz/topic/46811-pfl-e30-320i-work-log/

I'm selling my e30 as I have bought an e34 540i which will be replacing this as my project car. I've done as much as I can to keep her nice and tidy. 1986 320I with 170ish kms. Factory manual NZ New, and I'm the 2nd owner. Originally from Dunedin. I trucked it up to Auckland about 3 years ago. Cambelt, waterpump and oil seals were done soon after I got it. Serviced regularly at least twice a year with new oil, filter. On top of the regular service I've done the diff oil, air filter, fuel filter, brake fluid. Also replaced the exhaust as the old one had a hole, put in a 325I exhaust on. Has Z3 short shifter installed and the trans oil changed same time about 2 years ago. Currently sitting on 16 inch genuine alpinas with Bridgestone RE003's that are about 1 year old. Has been lowered on H&R Sports brand new from the states, with brand new KYB Shocks about 1.5 years ago. Installed Rockford Fosgate speakers in replacement of the old torn stock ones. 3 are installed (2 rears and 1 front) and the last one is still in box as haven't had time. Will come with the car. Interior is in good condition with an almost crack-free dash. Only a small rip on the drivers seat pictured. Some paint fade on the bonnet but otherwise paint is pretty good for age. The bad: There is some oil leaking at the front which I haven't had time to look at yet. And the engine is running a little rich. Extras: I have an M20B23 engine on my stand that I bought to put into the car but never got around to it. It can come with the car if you want it as I obviously won't have a car to install it in anyway. It will probably need to be rebuilt a little but was supposed to be running as it came out of a running car. I'm hopefully looking for $5000 or near offer or can do $4000 without the alpinas as I have a set of 14 inch basketweaves that can come with em. Let me know if I'm asking for too much though....

From what i read they seem pretty close in hp and torque which is why it seems like a good idea. Would the ecu work or will need a b23 ecu? Sent from my SM-N9100 using Tapatalk

Sorry to resurrect a thread but was interested with the B23 as well. I was able to grab a semi decent one for cheap and was wondering if anyone knew if the B23 is a drop-in replacement for an L-JET B20? I've got a PFL B20 and so far it seems that I can drop in the B23 without any changes to wiring, etc. Would the ECU for the B20 work as well? or would I need an L-Jet B23 ECU? I'd prefer not to redo the electronics and such, which is why I wasn't really considering an upgrade to Motronic or anything else.

Got any photos of it on a car? I mostly see tech 2's so hard to imagine. These are for PFL's right?

Are these for 6cyl? Sent from my SM-N9005 using Tapatalk

Whereabouts? I can't seem to locate any unconnected hoses on the intake boot. That's where I was looking as I found a forum post that mentioned it but still couldn't find it... Is it supposed to have oil? Whats the purpose of it? Thanks for answering.

Anybody have an idea for the above question? Sorry for the bump :S

Can anyone tell me where the number 3 hose goes? Or where number 4 is? It's for an M50b25 e36. What does it do? It seems like the previous owner has left this hose hanging on the side and is spitting oil every now and then. Thanks

Hey Guys, I've got a set of stock 6 cylinder springs from my e30 320i. Not sure how much theyre worth but lets say $80. I'm in Auckland. PM me if you're interested.

Thanks again @slybma will watch out for em Sent from my SM-N9005 using Tapatalk

Thanks @slybma. Any model types i should watch out for? L Sent from my SM-N9005 using Tapatalk

@slybma - are the leaks much more than any other car or same chances? @haitoman - i saw an xr model. Whats the advantage of a gti? I guess this is mainly for daily so not a big deal if its not quick. More important is that its reliable so i was thinking along the lines of getting the more reliable engine type. Sent from my SM-N9005 using Tapatalk

Forgot to mention looking at the early 2000s model. Sent from my SM-N9005 using Tapatalk

Hi guys, Just thought i'd ask around if anyone has any experience with these cars? I know this isnt a peugeot forum but thought i should ask anyway. Looking at buying one for my partner and they look decent. Any problems i need to look out for? Are they good cars? I know peugeots people have mentioned there are some good ones but this one is stock standard, nothing fancy. Thanks. Sent from my SM-N9005 using Tapatalk

Thanks mate, didn't know you were part of the forums. She's getting better slowly. Hopefully i can get a respray in a year or so. Sent from my SM-N9005 using Tapatalk

Couple of photos from my recent changes to the car: New shocks, springs, shock mounts, tie rods, master and slave clutch cylinder

Hey mate, did you post this on fb as well? I think i messaged you. After the shifter assembly with the knob. How much? You in auckland? Sent from my SM-N9005 using Tapatalk

Anybody have an idea what bolts are used to mount an m20 onto an engine stand? Length? Type? Sent from my SM-N9005 using Tapatalk

Can anyone point me to where they normally buy vacuum hoses? Mine are pretty old and was looking at just replacing most if not all of them. Would i be better off getting OEM or are there better alternatives that do not cost much more than the OEMs?