slybma

I just went and had a look it has two sensors a blue and a black one, i wired it in when i did the conversion harness it reads just not correctly so id say itll be due to it being the wrong sensor. im not sure if its the blue or black one i need to swap out though so might be trial and error just need to get one of those brown m20 sensors

Was the plug the same or did you need to change it over from the m20?

The temp gauge on my E30 has been stuck on cold since doing my M50 engine swap and i realised that i forgot to swap the sensor from my old engine over to the new one so im looking for a sensor or if anyone knows the part number? The engine is running quite rich and im not sure if its due to it thinking its cold or something else, do the M50 ECUs read engine temp from the same sensor as it uses to set the gauge or do they run two sensors? Would appreciate any help.

What brand are the lowering springs? And sorry to be a pain but is there any way you could measure from the center of the wheel to the edge of the rear wheel arch, or if you have removed them already the height of the rear springs? just trying to work out if ill get a bit more drop

I got XYZs but because ive done the five stud swap in using a set designed for a compact e36 which is more than likely my issue

Haha ya ill call that plan B

My adjustable suspension for the E30 arrived today and I tested the rears and the car still wont sit low. Even without the collars in with the springs the car still sits too high, there has been a fair bit of weight removed from the back but surely there's a way to get the tire to tuck in the guard. Has anyone had any success with a certain spring?

Have been driving the car around a fair bit lately and started noticing a few issues the standard clutch has starting to slip with any kind of load so basically anything over 2000rpm so a HD option was ordered. The front e36 suspension spring hats are a fair bit bigger than the e30 ones so on our lovely NZ roads, the spring hits the inner guard over big bumps so I ordered some adjustables to counter it and help lower it some more which arrived today. I tested the rears and the car still wont sit low. Even without the collars in with the springs the car still sits too high, there has been a fair bit of weight removed from the back but surely there's a way to get the tire to tuck in the guard. Has anyone had any success with a certain spring?

Last one i got from Partsmaster cost me $170+ it was an Exedy kit, that was at trade price though

How much would you be after for the car plus all the bits needed to fix it up?

sorry man sold them

look awesome, glad your happy with them

Ill have some super low fronts with near new munroe shocks up for sale as soon as my adjustables arrive? Will only want $100 for them

Seats have sold, happy to make up plates for a small fee if anyone is interested

They would,have lifted the seat by 6mm as that is the thickness of the plates used, ill try put up a picture soon but the seats are still in the car so would have to remove them first

Na i bought these from a wreckers locally then made up some adaptors

Have some e36 black leathers with adapter plates for e30 if you are interested?

I have decided to sell the E36 seats I converted into my E30 as in the near future they will be removed to make room for a roll cage. I also have the adapter plates needed to put these into another E30 they can go with the seats if wanted. I would also consider a swap for some Race seats can do cash either way (anything considered) or some E30 front seats plus some cash to keep it drive able in the short term. No rips or damage, have since had a good clean after this photo was taken welcome to view or contact me on 021 332 145 if interested - SOLD Can make up more adaptors for $65 plus shipping

Finally got the exhaust all done, sounds really nice will post a video up this weekend

Both sets sold

Looking good man, nice choice of wheels

Have you got everything needed to stroke an M50 to 2.8? If you do I'm keen depending on shipping cost to Napier

love it!! Looks awesome man

looking good man, will be worth it all in the end.

E30 jamex springs sold. Still have E36 springs