Sammy J

time for an update, Radiator is mounted in place and all plumbed up along with all the other plumbing. Have had a bit of difficulty with drive shafts and the PCD of the flange that bolts to the rubber donut being different but have fixed that by getting an aluminum one made up and pressing some rubber inserts with steel tube to absorb the vibration. Have just put the 2.93 open diff in to get it on the road and driving for now. exhaust is made up and bolted on..havnt started it yet Have put my set of wilwood brakes on! mm they are so nice haha! If any of you guys are interested i have copied the brackets, hats, bolts etc that i used and kept all the part numbers to bolt straight onto an e30. So if anyone is interested PM me and i will get a quote for making a set up depending if you want all the hardware too or just the instillation kit. items left on the to do list now are: master cylinder under the dash air filter fluids finish putting the dash and interior back together cooling fan washer bottle overflow bottle So the list is getting down to the final little things now so hopefully not much longer. enjoy

that tourings just plain sex

I need the two flanges that bolt up to the e34 m60b40 A/C pump. Need them rather soon. Thanks Sam

cool cheers mate definatly put me down for two sets

Im really keen for two sets if your getting more. Thanks

Glen i also need a either e30 or e36 med case diff cover.. what are they worth? i only need the back cover. Thanks

If there was someone that knew how to fit into an e30 i would buy it to put in my car, its the right ratio and everything. have tried searching the web to no avail

Hi everyone. I am selling me reconditioned Medium case LSD for an e30, ratio is 3.64. If some one has a medium case 2.93 LSD that they want to swap i would be keen, or there is some on ebay usa if someone clued up on getting them here could help me get one that would be much appreciated. looking for $800 cheers Sam DIff is now sold

Hi glen, I will take your towbar if it doesnt cost to much to ship to ChCh. could you let me know what it will cost? Thanks Sam

hi guys, Shipping is $40 anywhere in the north Island. Sorry its taken so long i have been really busy with study etc. Any more takers?

Mate i have a whole heap of 325 stuff left over from my conversion, like brand new facelift radiator and a engine wiring loom which is complete A/C condenser and heaps of other little things. if your interested give me a text on 0272618440.

Haha nice

do you have a picture glenn?

have tried assembling it and it sits really far to one side and the bearings dont seit where they need to.

right time for an update, not much to update really though. Driveshaft is now sorted and radiator after its 4th trip back to the shop is right. My main question to people is regarding my diff. I bought a e28 2.93 med case open diff and a 3.46 med case LSD. I have been trying everyone in the know in chch and no one can figure out how to combine the two. So i have attached a photo to show what the problem is. The 2.93 gear is on the lsd pack, the 3.46 gear is now on the open pack. notice how the 2.93 gear is thicker.. and also it sits up a lot higher (5mm) than the 3.46 gear. you can see the gap between the 3.46 gear and the flange as to how much the 2.93 on the lsd sits up. Hope that makes sense but does anyone know what i can do???? im at my wits end

Yep it is rather frustrating when there was i think 10+ people interesting so i do the running around and organizing of it thinking that i would at least be able to recover my costs (which is not looking good) where as i could have just fitted it and been happy with it. I figured since i have been looking for one for a while now and having missed out on the last due to a technicality here on B.S that i would see if there was interest in a fiberglass one. Oh well. Yes if there is a few numbers i can "make to order"as this is easier for everyone on my end. So if i can have a confirmed list of people that want one by next Thursday the 20th i will have some made if the numbers are sufficient. The lip replaces the black plastic lip on the cars factory it doesnt go on the black lip.

Hi guys just checking that there is no interest in these anymore??

sold my tech 2 steering wheel for $250 not to long ago when i needed cash.

whats the lowest cash price you will take mate?

haha +1 soooo keeen

Sorry mate i have a facelift car and have no real use for a tech one front. Tech two and itd be a done deal however.

mate today was such a blast! your car handles amazingly! You must be stoked with the results. thanks again for the fang around, now i owe you one in mine:D

Pics of fiberglass lip for those interested. The weight is no more than 2kg and i forgot to get dimensions but same width as your e30 front kit. The lips is made to a high standard and of strong fiberglass.

Well buy an OEM one then mate.

wow, very cool project. will be keeping an eye on this