mynbmr

Welcome to the club, 12k for me

For sale E36 AC Snitser fiberglass lip and splitter $125.00 Can sell separate lip $75.00 splitter $50.00

I got this one 1/43

Yep can do lip and splitter $ 125.00 tex me 0272417328

That Hamann is a nice lip, My one is made from a AC Snittser bumper, that came of my daughters car many years ago lol

And now they have a brother E36 lip and splitter ( same price as the E30 lip and splitter )

Good driving skills ?

Hi there Now we are in lock down I had some time to make a mould for a E30 IS splitter to go with the IS lip. so if any one is interested after the lock down lip $75.00 and splitter $50.00 Cheers Hans

Thanks Brent. Have you got a price for them and mayby a photo of them please. If they are not too bad I may be able to fix and make a mould of it, and than make a fibreglass one. Thanks Olaf. May paint it red with black trims

Did some more on the car this weekend. Got the back corner and under the boot lid finally welded up, smoothed out and undercoated, cleaned the inside of the boot, sanded the surface rust off, and under coated that too. Made a fibreglass front because the original was all broken up. All I need now is a back bumper, if any one has a back e38 one lying around, let me know thanks.

Found some new motivation to work on the car again, new coolant expansion tank and cap, new idlerpulley's and another steering pump, thanks to Troy, no more noise when steering.

Good read Andy, Noting wrong with a good dutch beer

Bugger Andy, i dont have to send a IS lip to Canada than. Good score on the car, looking good Good to see all is going well over there. ps truck is finally back on the road.

Withdrawn by TM

After 3 tries to set the timing right and new spark plugs, i took it for a test drive today, and no problems. Troy came down tonight and put it on the computer and cleared most of the codes, only 2 codes left, passenger airbag and drivers side seatbelt tensioner, and now the cosmetic outside of the car to do. Should be all done by the time I get my licence back. Thanks Troy

Emaild them thanks Glen, but they hire only if you got a mechanical workshop

Borrowed a home made tool of a mate thanks Glenn

Anyone got a m62 camshaft tuning tool kit for hire please thanks

Dont worry even Huntly is expesive, next door and two in our neighbourhood over $500k. build ours 40 years ago for $39k and section $8.5k. 3 more sections left in street over $100k each

I can see where Murray is coming from, its a hobby and money is not what it is all about. Its the achievement and satisfaction of having done it yourself, I will spend over 8 grand on my project but the car will still be only worth 3+ grand

New radiator and oil cooler in, lights back in and working. Had the motor running today, but it runs rough and is back firing. We have to figure out what that can be, any suggestions would be appreciated. Cheers

Oh duh ! forgot earth wire from motor to chassie lol This weekend connected all the oil lines, new fuel and oil filters, new fan belt. Connected all the coils and throttle cables, Also put the exhaust on. turned the key and she fired up for a few seconds running rough. Now i have to get a new radiator and new hoses. Getting there slowly

OK conected all the wires, checked all the fuses, took the old alarm system out, and car still wont turn over. what did i forget to check. cheers

Back where it belongs, now the hard part, connecting all the wires and hoses.

Remember Friday labour weekend, wellington blocked for 18 houres, that was me lol, had a heart attack, changed the oil and filter in gearbox and put it back on the motor, ready to put back in car.