promo
-
Content Count
182 -
Joined
-
Last visited
Everything posted by promo
-
happy to code for you. .021 0894 1411
-
Lock button not working on 1 of my Key Fobs
promo replied to ScottyDontNZ's topic in Electrical system
Hi, i can supply new fob and program.- 1 reply
-
- 1
-
-
i can help, contact me on 021 0894 1411
- 1 reply
-
- 1
-
-
Sorry i meant K+DCAN cable cant do it. Kess v2 and Ktag can. i have both, also bitbox, pcm flasher, mmc flasher etc. have done a lot of remaps different cars
-
Hi there, none of those cable will able to flash a custom rom. I have tools to flash your DME. Since you're not based in wellington you will need to send me your ecu and ill tune it/flash for you Pramod
-
Sorry. Updated now
-
BMW e60 active steering module, can help with coding if you're based in Wellington. Airbag module coding, remapping, dpf deletes etc.
-
Yep easy - 021 0894 14 11
-
F series is done via Esys coding.
-
Hi Everyone, Happy to code this for free anyone in Wellington ..! PM directly
-
Hello, If you have no luck i can get them cut in wellington. Have you got someone to program the keys to the cas?
-
happy to code this for you remotely (Teamviewer) if you have kdcan cable and software
-
hello, happy to help anyone who needs keys done for all models. upto 2015
-
Motorworx Adelaide road 04 385 0060 ask for Noel
-
tool32 wont flash it for you. only recovery is by eeprom programming. 021 0894 1411 if you need help
-
I;ve seen this problem before where the FRM module gets corrupted i.e flat battery, jumped started. ISTA wont fix your issue. You need to reflash firmware or replace FRM. have done a few of these. easy to rule out by plugging in a second hand FRM unit. then coding it. or fix your old one via reflash.
-
replace with secondhand abs module, recoded and recalibrate Steering angle sensor.
-
Hello, did you manage to find someone? I can help if required.
-
I have a launch and the BMW Dis if you need a scan.
-
hi My545, you can actually decode out the seat mat sensor or use diode and resistor to by pass it for around $4 dollars. common issue on BMW's.
-
Hi there, whats wrong with your old one? If there's an internal error I can clear this for you. You will need to post the module to me.
-
EGS module will need to be coded - else remove from old when installing the new trans.
-
HI there, happy to help anyone who needs keys programmed for cas 1, 2, 3 + and EWS systems. I am wellington based. if you're outside of wellington you will need to send cas or ews module to me. call or text 021 0894 1411. I also do remapping, coding, module replacement etc.
-
hello, give me a call on 021 0894 1411 have some parts that i have stripped
-
hello, give me a call on 021 0894 1411 have some parts that i have stripped