Bennyboy

Okay so I'm back to square one.....

now on the look out for a 3.46, in LSD or otherwise.

thanks in advance.

Sooooo,

lucked into a set of Pitlane's for my e28 only to find the following:

existing nuts are too short, and, the cavity where the head of the wrench would go in to tighten nuts is too narrow to accomodate the wrench..........

such a noob.

cheers!

This is niiiiiiiiice!

passing thru the Bay, perhaps?

Fair play.

Any (reasonably priced) suggestions?

Hoping someone has either used parts or a full set of springs/shocks or anything for that matter.

Thanks in advance

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1236464017.htm

Thanks!

Hi guys, I remember reading about one of the members on here offering a service doing some amazing work refurbishing tired rims. 

Cant find the thread, though.

help!

Money talks I spose. So is the car likely to be M6 spec otherwise? ie; hand built, suspension etc etc?

still, seems nuts to me!

Or is it a 635csi with an M88 chucked in?

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1231494263.htm

PM'd

Well, after some reading, it sounds like my motor would be better suited to the 3,46 ratio.

anyone sitting on one these, LSD or otherwise?

thanks again guys

Cheers Brent,

will the 3,64 bolt straight up to my '87 525e

Ideally yes. 

But, will build one if needs be, so will need the correct ratio for starters.

Looking for the above diff to fit to the e28.

cheers

Looking good, Barry!

can I ask who carried out the resto on em?

And another.......

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1183587370.htm

dime a dozen these days it seems

Is it this one?

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1180938776.htm

On 16 September 2016 at 8:44 AM, Barryn said:

Well, thanks to Rohan & Jasjot from Bimmersport I will be getting a refurbished set of BBS RC090, the rims I have wanted since I saw them on Rohans M535i, Then I will remove & store the Existing rims & Michelin tyres

So I am looking forward to getting the rims on my car

One very happy camper

By the way here is a photo of the tyre

Regards

Barry

Awesome news! Pics?

Nice. How is the look/ride? Pics?

Did you go about fitting the upgrades yourself?

What was the rough cost, Rohan?

Suspension yet to be determined......

i was was recommended this as an option:

https://www.ecstuning.com/BMW-E28-528e-M20_2.7L/Suspension/Performance/ES3026565/

thoughts?

You could ask this guy, Barry?

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1134766759.htm

Big brake upgrade completed! 

e34 540i upgrade on all four corners, all much bigger diameter, and vented. Full flush and new fluid. Significant improvement in the braking dept.

Haven't given them a full test as yet, will give the new pads an opportunity to bed in first.

Whoa.

http://www.trademe.co.nz/motors/used-cars/bmw/auction-1111356682.htm