0ghost0

PM'd you mate

Looks Pretty Tidy for the miles/Kms.

Always run on 91 fuel........ SOLD! *edit* beaten to the punch

Sport seats? Keen if op does not want them..

Cool man, sorted. On trademe now looking for facelift headlamps, thanks again

Basically if I just cut and solder the facelift plugs to the respective low beam and high beam wiring on my pfl. And for the park, hook up + to the current single park wire and earth the other wire directly to the body. I should have no issues. However I don't see what that pic shows, is that the holder for the wedge park bulb? Because I can only see one wire. Correct me if I am wrong. Thanks mate

Hey mate , there is 3 going to the low beam cluster. I assume positive and negative for main beam and 1 positive for park lamp, must earth on its housing. High beam is 2 wires. See photos

Awesome mate, thanks for the info, I will upload photos when I get around to doing it.

Sounds good so I just would need to swap the plugs over by cutting and soldering? I heard prefacelifts have 3 wires per bulb while facelift only have 2 ? Any of this ringing true?

I have a e30 pre facelift which has a small swimming pool in a low beam headlamp. I was wondering if facelift projector style headlamps are straight plug n play or require modification to fit. I am no auto sparky but I can solder plugs and wires. Cheers

I have a e30 pre facelift which has a small swimming pool in a low beam headlamp. I was wondering if facelift projector style headlamps are straight plug n play or require modification to fit. I am no auto sparky but I can solder plugs and wires. Cheers

Heya After super low springs of any brand for the front on a e30 Rear also if possible. Sam

Hey mate I will take em No chance you have fronts also?

Hey mate No chance these are still available?

Hey, after a small case diff for a auto 318ti, has developed a whine on decel and want to nip it in the bud before my karma catches up with me. Cheers 021 02728676 Can pick up anywhere in auckland, Any ratio is fine, longer ( top speed) diff would be preferable but beggars sure as hell can't be choosers.

Is it just me or is a single 2" pipe too small for a b25.... Maybe perfect for a m10b18..... Did the car run all good?

haha i knew it. Good looking car, how much are you looking for? (ballpark?)

Sorry mate not really willing to main freight them, I work 6 days a week. Pretty much sold ish, going to sort out sale with the first person that got ahold of me, then th 2nd if something happens, so on and so forth. Thanks

Have theese lying around, plan was to fix them up and fit them onto the next daily, but I can't tear myself away from buying another e30. Factory BMW wheels. Guy I bought them off was in the process of restoring them, got over it and was going to scrap them. All 4 tyres look warrantable, 2 have camber wear. All hold air. $80.

No sorry mate.

Hey all, Have a large ass' of spare interior parts for a e34. Just stripped one for race spec, Most of the interior is up for grabs (Dark Grey Cloth interior) Just want it gone. FREE. Auto Trans 4 speed ($40) m50 Starter ($35) Flex Plate ($10) Just want scrap value for that stuff. Pick up in Grey lynn area. Will add Photos tomorrow

My daily driver for sale, Not perfect by any means, but its Still a great car. http://www.trademe.co.nz/motors/used-cars/...n-458836053.htm 021 02728676

Hey mate, Do ya have the hubcentric rings for that e34? Or did ya rock them without?

cheak your pm mate