Search the Community
Showing results for tags 'e28'.
Found 81 results
-
http://www.trademe.co.nz/a.aspx?id=1081441559 "Im lead to believe that this was the last e28 to be sold new in NZ and was bought by the then BMW Club President. She has obviously been well taken care of over the years as the overall condition is pretty good. There are a few small dents but the car is rust and accident free. I bought it in April 2015 with a blown head gasket. The head was crack tested and rebuilt as well as the bottom end inspected. Internally the motor is perfect and it does not use/drip/burn any oil. The transmission shifts perfectly. I have replaced boot and door seals, new brake pads, filters, wheel bearings and the previous owner replaced the radiator and radiator hoses. I removed the interior and had everything cleaned, other than the rip in the drivers seat it has come up really nice. This model has the factory LSD and bilstein suspension and the car drives very smooth. I have done a couple of longer trips over the summer and its has been an awesome cruising car with surprisingly good fuel economy."
-
I'm after a single mass M30 flywheel to fit my M30B35. Could make use of a clutch too if someone happens to have one as I'm looking at getting one rebuilt to stronger specs. Can anyone confirm if M30B28 flywheels are the same? I'm in Auckland but beggars can't be choosers and all that.
-
I'm currently stripping (and cutting) a 1987 525e for parts for my 85 525e and 86 m535i. I don't really have enough space at home for all of the parts so I need to get rid of some. Once I've finished stripping it I'll post the excess parts, but in the mean time if there are parts you want just ask (as I also have spares from my other e28s). I will get pictures up either this evening or tomorrow (and prices, don't worry mods ) Some parts I know I will have excess of are: doors (various conditions) Shocks and hubs Maybe some glass
-
I need an instrument cluster with normal rev counter, NOT the eta one. Need to for my M30 swap. All gauges working. Who's got one to sell me?
-
The motor and gearbox are now out of my e28 1984 525e and are for sale. Motor includes everything attached in the photos including loom and ECU. Essentially complete. Loom has been cut at c101 plug but otherwise intact. Gearbox is the 525e Getrag 260/5 and includes flywheel with correct TDC mark, sensors, clutch and pressure plate (some meat left but I would recommend getting a new one), full shifter assembly (some parts no pictures) and clutch slave cylinder and rubber line. To do a manual conversion, you would additionally need the clutch hardline, pedal box/clutch pedal, clutch master cylinder, reservoir (I have one of these I can throw in) and driveshaft. Prices: $300 for complete motor, loom and ECU. $600 for gearbox and parts listed above. Pickup from Penrose.
-
1986+ 525e intake boot (have a newer TB coming to suit) Shift linkage support, 25-11-1-220-707 Thanks
-
My e28 is soon to be getting a M30B35. As most of you will have seen, I got a donor e34 with a good M30 and manual gearbox that's done 170,000 kms which will be going in. Engine, gearbox etc came out of the e34 over the weekend. Have been collecting parts over the last couple of weeks including Mtech rear spoiler, arches, and parts to repair some damage on the front from getting hit (working with the guy's insurance to sort it). Also just installed AP springs about a week ago. The car as it is now: Some of the damage: I'm pretty rubbish at build threads but I'll do my best to update as I go for those interested. Hoping to have the swap done by the end of April.
-
Hi guys, I wasn't planning on buying another project but an e28 m535i popped up for a price I couldn't refuse... I've now got two (maybe) e28 project cars and only space for one. I haven't had time to properly check the body yet, but will be doing so this weekend. If I decide it's worth saving I'll need somewhere to store it (fairly long term I think), if it's too far gone I'll just remove all the parts and put them on my 525e and scrap the body (as much as it pains me to do so ).
-
Can anybody recommend a good set of most likely 225/50R16 tyres to go on my 16x8 Style 4s for my e28. I'm not looking for the best performance, just reasonable performance and price. They need to have fairly straight side walls else they will rub on the front struts. I was thinking Bridgestone RE003s as that's what everyone seems to recommend. Hoping to spend about $200 per tyre, but will go higher if it's worth it in the long run (e.g. better tyres now, don't have to buy new ones for a bit longer). Thanks
-
WTB - e28 interior centre console with aircon grill in Black. Also I believe the temperature selector is required.
-
Looking to buy a c101 and c103 plug to suit an early motronic e28. I would rather buy some plugs than cut up my engine loom. They need to be the engine loom side, not the body side plugs. Thanks
-
Hi all, I'm selling a 1987 E28 525e on behalf of the owner in Napier, Hawke's Bay. 5 speed manual running a 2.7ltr M20 Just over 305,000km Power steering Sunroof Central locking Power mirrors Tool kit in boot (missing a socket) Documentation and service history Registered and warranted They'd like to let it go for $4,000. However they're open to offers so please PM me.
-
Preferably in biege, but other colours considered. It should look like the picture below and have space for two speakers inside. Thanks
-
Hi guys, looking for some advice regarding the stereo in my e28. Currently I have an ok sony headunit (CD, FM, AUX, front and rear out RCA), two stock 6x4 and two sony 6x9 that came with the car (I'm not planning on using these). My car does not have the premium sound package so I only have 2 6x4 speaker mounts in the kick panel and 2 in the parcel shelf (these are empty). I would like to keep everything looking as close to stock/OEM+ as possible, so no cutting of major components or irreversible changes. The headunit is fine for now, but the speakers need an upgrade. I'm looking at buying: 5 Channel amp Small, maybe 10" sub to go under the rear seat 2x 6x4 component/plate style speakers (or equivelant individual speakers) 2x 6x4 speakers, probably coaxial, but could be component or individual speakers with a premium parcel shelf grill Most likely 2 tweeters (probably on the a pillars) My budget won't be super high, but I'd like to buy a few quality component rather than lots of average ones. I can also space the buying out, but the amp would need to come first, followed by some 6x4s Thanks
-
Want to buy 18"/19" inch wheels 5x120 Wanting something bigger than 8" wide After 3 Piece BBS/Rotiform/Work/AC etc or something really nice 1 or 2 piece To fit e24/e28 so preferably needs to be less than 20p Cheers!
-
Hi guys I can get new kyb front shocks for my e28 for $100 each. Is it worth it? I'll upload a video of my current shocks tomorrow. Which I think are original monster truck ones Thanks Edit: I know they aren't konis or bilsteins
-
Hi everyone The Getrag 260 that came with my car has the wrong bellhousing on it (m30 instead of m20), so I am looking to buy either a: Getrag 260 Getrag 265 Getrag 240 Getrag 245 ZF S5-16 All with either an m20 bellhousing or removable bellhousing and either the holes for the sensors or the ability to have the holes added. Also a matching driveshaft and shift linkage would be good too. EDIT: and the cross member Thanks
-
So I bought my first car on the week end, but it needs a bit of work... It's a 1985 Bronzit 525e that is half way through a manual swap, it's got manual windows and sunroof but that just means less things to break (I hope). It's a bit of a mess at the moment, most of the center console is taken apart and there is no gearbox or driveshaft in it. The previous owner has done most of the electronics and put the pedal box in.
-
Hi everyone. Looking at buying a 525e in the middle of a manual swap and just wanted to check if it would need a cert or some special mention in insurance? I believe a bracket needs to be welded on for the shift linkage. thanks
-
Is actually in Wellington, not Nelson. Would be a steal if it was a manual. I guess at 1 grand it's not too bad as an auto either. http://www.trademe.co.nz/motors/used-cars/bmw/auction-875897866.htm
-
Hey guys, Would you happen to know if a E28 full manual conversion kit would fit on an E30? One has popped up for sale from an M20 powered car, and kinda want to jump on it ASAP cause its a steal. Getrag 260 box btw. Will the pedal box etc all fit in? Thanks for your input.
-
Bring out your orphans. Will consider all options. Don't want to spend a lot. Not metric ;-)
-
A shot in the dark but I'm after a M Technic Rear Bootlid Spoiler for an '87 E28. Preferably in good condition. Cheers!
-
E28 rear tail light for sale. Used, it has a registration number etched in to the reflector. $60, plus shipping which I am guessing would be $15 or pick up south auckland.
-
Looking for a boot lid for my e28. It's a 525e - Car is Steel Blue from memory - be good if I could get it in the same - cars paint is not flash so I'm not fussy if the clear coat is poor.
