kerry 10 Report post Posted October 22, 2009 (edited) so i took my car to gavin today, e30 m52tu 2.8l we run it up and the base map was 163rwhp. i did not think it was that bad, anyway we got to work and after a few hours he had her singing at a sweet 195.5rwhp,gavin said could have hit 200 or a bit more but he said he didnt want to let it leave knowing that it could be unhealthy or wot not. as for bang for buck i couldnt have spent better money anywhere, 30 horse on a re-map im over the moon. so on the way home it decided to rain!! well f**k me, i went to pass a truck in 5th and dropped to 4th and fully stepped out sideways shocked as i was i managed to correct it. (few). chinese rear tires i will add all in all gavin is the man. will get pic of last dyno run when i can Edited October 22, 2009 by kerry Quote Share this post Link to post Share on other sites
oscar90 0 Report post Posted October 22, 2009 wow sounds good! thats a healthy increase! Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 wow sounds good! thats a healthy increase!yea i thought so. dont think you would get much more from a link ? Quote Share this post Link to post Share on other sites
_BRS_ 209 Report post Posted October 22, 2009 Bring on next Saturday the 31st is all i can say, Can't wait to see this beast! Quote Share this post Link to post Share on other sites
BM WORLD 1283 Report post Posted October 22, 2009 thats a good gain . 119kw to 143kw . had my e36 325i there a little while ago got 111kw . have seen other dyno results with 328i around 105 to 110kw etc I am looking forwarded to getting the e36 328i in soon , with its new headers etc Quote Share this post Link to post Share on other sites
mark247 39 Report post Posted October 22, 2009 went to pass a truck in 5th and dropped to 4th and fully stepped out sideways shocked as i was i managed to correct it.f**kmint bro!! Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 for sure brent as you know he will get the best he can, hope you get a good result also Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted October 22, 2009 (edited) ^^ Hey Mark, deja vu is a funny thing...remember last week when I was in the front seat of your car scheeezus. Nice work Kerry, running some tight numbers. Edited October 22, 2009 by Forrest Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 mark you maniac haha , cheers forrest Quote Share this post Link to post Share on other sites
mark247 39 Report post Posted October 22, 2009 Looking good, 195hp at the wheels NA is mint. Do a skid. Quote Share this post Link to post Share on other sites
Sammy J 1 Report post Posted October 22, 2009 Thats awesome, wonder what he could do with the v8...... could be worth the drive Quote Share this post Link to post Share on other sites
tonylauno1 7 Report post Posted October 22, 2009 as for bang for buck i couldnt have spent better money anywhere, 30 horse on a re-map im over the moon. so how much is remap? I have a m52tu as well, would be nice to have all the hp like when new. Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted October 22, 2009 ^ Aren't they roughly $1000? Quote Share this post Link to post Share on other sites
bravo 35 Report post Posted October 22, 2009 Depends on how long they take. If you budget $1000 you won't get a nasty surprise, but it may be cheaper if its fairly straightforward (this is based on my experience with Gavin. Mine cost over $1000 but was a FI tune from scratch) Kerry - Gavin's dyno reads a tad low, so in reality you're probably cracking 200hp. Quote Share this post Link to post Share on other sites
DRTDVL 0 Report post Posted October 22, 2009 Kerry - Gavin's dyno reads a tad low, so in reality you're probably cracking 200hp.My car was 135hp @ the wheels at Torque Performance and 124hp @ the wheels on gavins before i put the chip in if remember correctly... done within a month of each other and no mods (same tank of gas too) Quote Share this post Link to post Share on other sites
Guest FrantiC Report post Posted October 22, 2009 That is mint man. Wonder if he can work with megasquirt?? Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted October 22, 2009 What gearbox and what diff ratio are you running Kerry ? Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 What gearbox and what diff ratio are you running Kerry ?running a e39 523 manual trans(getrag i think il have to get under to freshen my memory) 1.1 5th , and a rebuilt 3.64 lsd , im doing 3300rpm at 100 km in 5th so i think a 3.46 would suit better Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 Depends on how long they take. If you budget $1000 you won't get a nasty surprise, but it may be cheaper if its fairly straightforward (this is based on my experience with Gavin. Mine cost over $1000 but was a FI tune from scratch) Kerry - Gavin's dyno reads a tad low, so in reality you're probably cracking 200hp. yea that's about right for price, 200hp nice might have to get it tested in hamilton for a comparison Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted October 22, 2009 (edited) running a e39 523 manual trans(getrag i think il have to get under to freshen my memory) 1.1 5th , and a rebuilt 3.64 lsd , im doing 3300rpm at 100 km in 5th so i think a 3.46 would suit better I'm running a Getrag 250 G 1:1 5th and a 3.15:1 LSD diff... I should have gone 2.97:1 TBH I'm doing 2,700rpm @ 100Kph Edited October 22, 2009 by *Glenn* Quote Share this post Link to post Share on other sites
kerry 10 Report post Posted October 22, 2009 I'm running a Getrag 250 G 1:1 5th and a 3.15:1 LSD diff... I should have gone 2.97:1 TBH I'm doing 2,700rpm @ 100Kph hmmm yea i might need to go something like yours glenn Quote Share this post Link to post Share on other sites
westy 614 Report post Posted October 22, 2009 Nice numbers. Tell us a bit more about your engine combo?? M52tu on OBD1 or something yeah? Quote Share this post Link to post Share on other sites
Guest FrantiC Report post Posted October 22, 2009 Does anyone know if he can work with Megasquirt? Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted October 22, 2009 Nice numbers. Tell us a bit more about your engine combo?? M52tu on OBD1 or something yeah? Its a M52 B28 with Vanos removed and M50 induction components running on OBD1 Quote Share this post Link to post Share on other sites
mark247 39 Report post Posted October 22, 2009 (edited) Its a M52 B28 with Vanos removed and M50 induction components running on OBD1 m54 head with high compression pistons too i think. Kerry will confirm what it is im sure. Edited October 22, 2009 by Mark247 Quote Share this post Link to post Share on other sites
