E30-323ti 66 Report post Posted July 10, 2013 Well, is it someone on here?? Where's the build thread. Quote Share this post Link to post Share on other sites
Lucan 196 Report post Posted July 10, 2013 Andrew (Andre3000)? Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted July 12, 2013 Was thinking it was going to be me or Dan Slater before I clicked on the link. But we didn't bother with pistons and rods. And with Dan winning the Open Class it proves they are not needed. Unless you are going crazy 700+hp. Quote Share this post Link to post Share on other sites
hybrid 1043 Report post Posted July 12, 2013 uh oh .. someones race series project out of the bag ? Quote Share this post Link to post Share on other sites
Ace Of Spades 51 Report post Posted July 13, 2013 I believe this if for a guy in botany/howick with a 535i and a large case lsd? hes a mate of a mate Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted July 15, 2013 Mines on facebook. Just starting to build it up now. If anyone is interested. https://www.facebook.com/E34Motorworx Quote Share this post Link to post Share on other sites
Eagle 1662 Report post Posted July 15, 2013 Sweet. It might give me some inspiration to turbo mine one day. Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted July 15, 2013 Easier than you think. Though the price rockets when you looking for reliable race car quality. And I have to chuck in if you ever need a Turbo talk to Steve Murch and go Holset. Quote Share this post Link to post Share on other sites
JoKer 58 Report post Posted July 15, 2013 is.. Murch on here? bit of a monster there in a 5-series (I think) Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted July 15, 2013 Mines on facebook. Just starting to build it up now. If anyone is interested. https://www.facebook.com/E34Motorworx Nice, 'liked' c/o the wife Surprised that beautiful manifolds fits with the RHD Steering Box.... FYI: Below is how I placed the wastegate on my manifold (twin scroll HX also) after consultation with Crunchy. Is a single tial MVR-44 with split running up to the valve face. Quote Share this post Link to post Share on other sites
nipe 1 Report post Posted July 15, 2013 Holsets are awesome, I love mine Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted July 15, 2013 Nice. Once I settle the motor in I will figure out where I can fit the waste gate. It will be a tight fit but the motor is going to be stood up a little for some extra space. Quote Share this post Link to post Share on other sites
E30-323ti 66 Report post Posted July 16, 2013 Nice. Once I settle the motor in I will figure out where I can fit the waste gate. It will be a tight fit but the motor is going to be stood up a little for some extra space. Should give a bit more space then. What size turbine housing did you go for on the Big-Block M30? 16 or 18cm² I was sure I had a better pic, but here is a bit of a side view of the WG port, comes off the collector at 45° Quote Share this post Link to post Share on other sites
Driftit 2078 Report post Posted July 17, 2013 (edited) Its been so long I have forgotten what size housing I have. Will check when I get home. Turbo is all packed away at the moment while I build up the long block. I have a feeling my waste gate will be around the same spot in the E34. There is not really anywhere else for it to go. Though my turbo sits much further forward. Was going to talk to Steve about where I should place it for best results. Then probably see if I can get Dan Slater to do the job. Edited July 17, 2013 by driftit Quote Share this post Link to post Share on other sites
