Contrails 317 Report post Posted May 17, 2016 G'day everyone, It seems my shocks are on their way out on the E28 M535i. Because I am running after market lowering springs, I am looking at getting the shocks re-valved to pair with the springs. The shocks are Bilsteins with AP springs. Any places in Auckland you would recommend? Regards Quote Share this post Link to post Share on other sites
Navin 180 Report post Posted May 17, 2016 George Stocks or Autolign are both worth a try 1 Quote Share this post Link to post Share on other sites
Contrails 317 Report post Posted May 17, 2016 Thanks Ron, will give the mentioned names a call. Quote Share this post Link to post Share on other sites
*Glenn* 854 Report post Posted May 17, 2016 Give Chris a ring http://www.stech.co.nz/ 1 Quote Share this post Link to post Share on other sites
Silver Fox 43 Report post Posted May 18, 2016 what Glenn said, Chris did the Bilsteins in my E28 racecar, excellent guy very good. Quote Share this post Link to post Share on other sites
Arborguy 7 Report post Posted June 14, 2016 I believe race shocks rebuild en about $40-50 cheaper than autolign. Quote Share this post Link to post Share on other sites
gjm 3258 Report post Posted June 14, 2016 I was going to suggest Chris at Suspension Tech, too. I've nothing against Stocks (etc) but this really is Chris' 'thing'. Quote Share this post Link to post Share on other sites
Ugan 41 Report post Posted June 14, 2016 I used Autolign about 18months ago to rebuild my bilstein coil overs, should have just bought a new set of coil overs. Quote Share this post Link to post Share on other sites
Matth5 471 Report post Posted June 17, 2016 (edited) My leaking KW shock is being done by Autoalign at a reasonable price. BM Workshop removed and dropped the shock off at their shop while they service my car. Allycat, why do you say that? Did they do a crap job or were they too expensive? Edited June 17, 2016 by Matth5 Quote Share this post Link to post Share on other sites
