E46 330 Driveline + manual conversion parts

[Cement 871]

Hiya ... looking for some upgrades for my 318ci as per the below:

330 Parts:

- Essentially full rear end (subframe, diff, axels, brakes etc) Ideally looking for around 3.5 final drive.

- Front brake calipers and carriers

- Master cylinder to suit

Manual Conversion Parts:

- Brake and clutch pedal assemblies + anything needed in engine bay (clutch master cylinder etc ?)

- Clutch line to slave cylinder

- Console surround and shifter boot (I have a coupe if that makes a difference)

[Harper 547]

@Cement Maybe try Ray from HellBM first? Might have some of those bits. 

[Cement 871]

Thanks Harper will try him tomorrow.

[FIAT 131R 223]

I have a full E46 330i manual conversion arriving at the end of this month.

 

[Cement 871]

10 hours ago, FIAT 131R said:

I have a full E46 330i manual conversion arriving at the end of this month.

 

This is for an engine / trans swap so don't need trans / related electronics etc. Would this would work for you to part out the conversion ?

[Anunzis81 32]

On 8/6/2020 at 2:03 PM, Cement said:

Hiya ... looking for some upgrades for my 318ci as per the below:

330 Parts:

- Essentially full rear end (subframe, diff, axels, brakes etc) Ideally looking for around 3.5 final drive.

- Front brake calipers and carriers

- Master cylinder to suit

Manual Conversion Parts:

- Brake and clutch pedal assemblies + anything needed in engine bay (clutch master cylinder etc ?)

- Clutch line to slave cylinder

- Console surround and shifter boot (I have a coupe if that makes a difference)

Hey, I have a rear subframe, axles, and brakes from a 330 wagon I took the engine out. I'm based in Auckland. 

Send me a DM and I can send you some pictures.

[Cement 871]

I'm all good for now thanks, the only thing I'm still needing is a clutch pedal.

[BM WORLD 1283]

2 hours ago, Cement said:

I'm all good for now thanks, the only thing I'm still needing is a clutch pedal.

https://www.google.com/search?q=35311163882&rlz=1C1GIWA_enNZ599NZ599&oq=35311163882&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

[Cement 871]

Thanks for this, I had one ordered from schmiedmann but was told yesterday its back ordered until December so will need to look elsewhere now.

[Kodachrome 151]

FYI Im also looking for a M5x compatible manual gearbox plus bits (for a M54B30) transplant.