Jump to content

Eddie

Members
  • Content Count

    492
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Eddie

  1. I took the car for a drive to Tauranga on Monday. I only got about 20km's out of Rotorua before the fuel pump plug on the fuel tank burnt out. I dodgy that up and continued on my way. About another 10-15kms and the car started to lose power, then after a little while it came back and then looses it again. It turns out the rear muffler is blocking up. Time to replace it. $101 dollars at repco gets me a new 2.5" muffler and now the car rev's out The old peace of sh*t I have also install some new white line front castor bushes
  2. if you get the early evo pistons' the valve pockets will even be the wright way round
  3. If you use the M42 Crank you don't need to machine. The Low comp de pistons will give you about same CR as a standard m42, the det will be lower again. I'm going to use the flat top de pistons, I still might only machine 1-1.2mm off and have them come up out of the bores to allow a little more for the machining of valves and head work, and still ended up around 12.5:1 CR
  4. I been thinking about long term engine options. At first I thought about putting in a 2.8l, but really this car was always about letting the kids having a go at motorsport. (plus I could use it) so I think a 2.8 is a bit to much for a 12year to learn in. A 6cylinder also means it will need bigger brakes straight away. So I'm back to keeping with using a 4pot for the time being. As the supercharger was only a raining day project done with limited funds (less than $200 to do) I never intended it to be used once the car has a roll cage. So we have pulled down a M44 a mate gave me I'm going to use SR20de pistons, with 1.4mm machined off the tops this should give the engine a CR of 12.5:1 If I bore it out from 85 to 86mm I can use an M44 head gasket, I would like to go to 87mm but not this engine at this time M44 rod with sr20 piston fitted
  5. Thanks but I fitted an inter-cooler off a vr4 The bonnet has also been fixed and painted along will the bumper also a bit of CF with some cheap gauges mounted it
  6. Eddie

    Time Wrap Warp

    the can is high on one side
  7. have you got a link to them?
  8. The setup is still a work in progress. But it works. The biggest gains were between 2000 and 3000 where the power is up by over 60% The AFR is a bit rich We stopping working on it after the fan stopped and she got a bit hot. I think I will fit an inter cooler and tidy up some of the pumping before I have another go at tuning it.
  9. The car went on the dyno after work today. Standard atw 95hp (70kws) supercharged @7psi 135hp (98kw) While it doesn't sound like much its still a 40% increase Had to change the injectors, stole some from a 90's rvr
  10. A bit of an update Remounted the alternator Removed the ABS Install a new fuel pump Walbro 341
  11. A bit a a design f##k up need to move the throttle body to before the blower
  12. its on and running. Its a crude setup at the moment as I just want to see how its going to run
  13. Got some tail lights now Started to sort out some some of the wiring inside the car that wont be need. Came across this plug, what a plug for f all This may have a job soon
  14. Been doing a bit on the car the last couple of nights Got the interior stripped out removed the tar stuff off the floor Removed the sun roof and controls then glued just the panel in Can I drive
  15. I guess you are going to use this car for drift and not race?
  16. Replace the rear crank seal in the coupe today. I was a bit surprised that it would be leaking at 100k Anyway I will put the manual box in tomorrow
  17. It looks like it may,The wife has put claim to the compact. The couple is a real mess on the inside The auto is installed back into the compact, also swapped out the radiators and fans. Just so I could put the electric fan into the couple
  18. Got up early and pulled the auto out this morning
  19. The car had heaps of parts in it. New ignition and door locks replacement radiator support panel Grills, front panel new inter tyre rods. head lights some interior panels and some indicators and tail lights, but they are off a 4door damage panels removed reassembled four door indicators don't fit sad no tail light so no hooning around
  20. The top of the AFM had already been off before I got the car. I didn't think that it would effect WOT but it did
  21. The compact could be on the way out and a Couple be in I got this today I hope there are enough parts in there to put it back together
×
×
  • Create New...