*Glenn*

There is no real cure for cancer... new panels are the only real fix

Exactly what I was thinking...could be something fishy with the vehicle for certification

This is obviously the car James http://www.trademe.co.nz/Trade-Me-Motors/S...n-375596060.htm

Give Retro Vehicle Enhancement a call Ph (09) 5820000 88 Leonards Road, Penrose

I've seen this happen before.... disconnect the battery for half an hour and then try the non gen key... should not work unless something has been done as Josh suggested

Proma MBL8... I've never used it...some say it works...other say it's a waste of money What car do you need it for ??

No... just remove the speed sensors if they are still on the strut assemblies.

Have a great day Jason From Glenn & the Team

Do you like pink Heino ???

http://www.politicalcompass.org/printableg...00&soc=0.82

Heino's Hino now is legal...115mm off the floor

The vehicles at 85mm. He's had a VTNZ check and were swapping the original springs back in as we speak. I'm surprised he didn't get pinged on the wheel offset

"I have Ac schnitzer type 2's on. off a 5 series 17x8.5 et 13 " ^^^ This is also going to be a problem with the VTNZ inspection. Wheel off set & tyre size. Going by the pictures Heino has posted, the wheel rims protrude quite away outside the guards. I've just sugested to him to take it to VTNZ first to see what he's going to get pinged with, then work from there. Refitting the original wheels & tyres would have been the easy fix.... but he sold them

The springs were a near new set of German B&G springs in original box with documentation. They were labeled to fit E46 4 cylinder vehicles only. I was told these should give approx 40-50mm drop. When we fitted these to the car with its original wheels it gave us a drop of just under 40mm... about 36mm from memory and the car was still at legal height. What is the height with your original wheels and tyres Heino ??... bring the car down and let me have a look

If that's the case...you shouldn't be driving either BTW:... Did you actually turn up there this morning ???

Thanks for that Kerry

If you know what your looking for, there are some realy good bargains amongst this lot

A freind of mine wants to transport 8 classic motor vehicles from Whangarei down to Hamilton. Does anyone know anyone in the industry that can help with this ??. Prefer 1 trip if that was possible to keep the cost down

Up to 80% off some items....... yes 80% Some examples : B18.30.7.792.190 5' E60 d Saloon ECE Catalyser/Diesel particulate filter 1 E6x 5er D $200.00 2,313.50 B63.12.6.941.615 Headlight Xenon E65 1 E65 $250.00 1,749.62 B63.12.6.941.616 Headlight Xenon E65 1 E65 $250.00 1,795.53 B51.47.9.119.691 Sun Blind 1 E61 $150.00 1,183.83 B63.12.8.377.264 E46 330 Xenon H/lite R upto 09/01 1 E46 330 $200.00 2,216.25 B36.11.1.181.887 E31 8'er CrossSpoke Style 5 Rim 8×17" (Front) 1 E31 $150.00 1,272.74 B17.11.1.177.850 Radiator E30 323/325/ Non A/C 1 E30 $134.00 673..4 B63.12.1.393.342 H/Lamp RHE3 2 E36 $120.00 576.32 B51.12.1.959.902 R/H bumper E30 Up to 9/87 1 E30 $44.00 236.25

We do all our wheel nuts with a dedicated torque wrench which is set at 90 ft llbs

It clashes with this Max... I'm not sure what I'm doing ATM http://www.bimmersport.co.nz/forums/index....c=35796&hl=

Saturday 28th May 2011 9.00am to 1.00pm http://www.smartmailpro.co.nz/s.aspx?xr58=...B245D0595B8BEEE Check here to see what's for sale: http://www.smartmailpro.co.nz/redirect.asp...0E56BDCDA0F845E

I'll sticky this if it isn't a repost http://www.smartmailpro.co.nz/redirect.asp...0E56BDCDA0F845E

Yours ??

I would not use it in anything mechanical that I owned... would make a good weed killer though