j_tomo

Hi guys Ive got a lost plug comes off the mass airflow meter loom, looks like a 2 pin sensor plug any ideas? ambient air temp? doesnt seem to affect the engine oh the joys of engine conversions!!! last one I swear!!!! cheers Germ

Ive just done that conversion, youl want ATLEAST a 2.8 or you might aswell stick with a m20 as said before, heaps of info on the net- google e30 24v pm me if you get stuck Germ

hi there could be keen on exhaust, let me know if its still available

HI guys My projects about half done, Hartge 318 m50b25 Engine and 240 trans is bolted in drivelines sorted but thats about it Ive shifted house and lost alot of bits so Im after e34 throttle cable radiator, not sure what will work- currently using original m40, doesnt look nice in there manual gear stick boot and cover e30 brake linkage parts also not sure what exhaust to use, tried e36/e34 m50 manifolds even tried modifying extractors but theres no room there will be heaps more I need but thats all offf the top of my head thanks Jeremy

thanks for the support guys Im in greymouth and its from hastings on a possitive note ive found a e34 525i motor loom ecu ect $500 in welly on a side note what e28 mounts should I be using? theres alot of cough b/s cough info on the us conversions but im not sure should be allright when finished black 1990 318i hartge coupe+ m50-5spd Jeremy

dam dam dam it is a 2.0L let the liability battle begin also looking for a m50b25 may be selling a m50b20 :banghead:

Hi guys Ive recently brought what I think is a m50b25 off trademe can anyone confirm that it is a 2.5L and not a 2.0L Ive tried searching the net but the block numbers dont make sence ecu numbers bosch motronic 0261200402 wbac22010fa <--- sounds like a chassis number but cant decode it 06547 07797/07797 1744773 block numbers 33920058 20 6 s 1 <-- tells me its a 2.0L 6cyl 25c91 <-- cast into block 1735813 <-- also in block head number 2.0 1720901 I just want to confirm it is what it is before I go back to the seller Realy dont want to waste my time fitting it to my e30 thanks Jeremy

well I got that arse about face so does anyone know of a front bulge m50 sump? thanks Jeremy

sounds like what I need, I can supply a standard e36 loom if wanted

Hi guys currently looking for a rear bulge m50 sump+ pick up, afaik from any 5/7 serries should work also after a exhaust, from manifold to tail pipe parting out a 85 320i good engine ect no manual bits also have the m40 out of my car up for grabs Im located in greymouth thanks Jeremy 0277670726

In my opinion (from what ive read) the 3.0L and 5speed modle is more reliable and doesnt have the same problems as the 3.2's, please people if your not interested in buying it dont comment. this is a family site so I will bite my toungue 18k is what I would like for it, how ever I doubt anyone will part with that sort of money hence the O.N.O part that lets the potential buyer know that Im willing to negotiate

velcrom- I would happily met you in picton. E39KiwiTouring- I live in greymouth, theres no beter place than my front lawn, also anyone thats looking for an m3 will know the upgrades over the standard e36, the k&n filter was for pictures only, currently has a K&n panel filter (the pod with be used on the 1uz) the vehicle was built december 1994,clocked up 40,000 od ks in japan, then made its was to nz, serviced by shelly bmw wellington land line is 03 768 4984 but im hardly ever home so I listed my cell thanks jeremy

looks like ill be keeping it, I gess that damn recetions to blame, if anyone serriously wants it send me an email, all offers under 15k will be told where to go as I find them highly offensive!!! for example, I were offered a primered up dx corola with cut springs and 5k cash- I WONT WHAT HES SMOKING!!!!! thanks jeremy

hey all, its still forsale you can see pics, details and work done to it on my previouse topic named "m3 maybe forsale" my partner and I have found a house we both like and as first home buyers we have to clear up some debts first email me an offer - itsgermdog@hotmail.com also on trademe http://www.trademe.co.nz/Browse/Listing.aspx?id=217387693 thanks jeremy

may also swap for a sxe10 altezza, e30 325i or simmilar plus cash difference thanks jeremy

yes you could swap the interior over but it realy isnt that bad pics were taken on a bright sunny day (yes we actualy do get them down here) with all doors and sun roof open 18k would be the lowest id take, its not worth selling for any less ill drop it off at picton or meet the new owner half way mtf is still going strong, they would be happy to finance the car and shaft you with intrest lol also its got the standard intake box with k'n panel filter not the cone filter in the pics jeremy

18k takes it away!!!!! it will be going on trademe in a weeks time come on guys this is what finance companys were made for

just a wee update new wof needed pads and rotors 1k's worth 89,000 ks now should also mention its had the vanos unit, water pump, alternator and battery replaced recently 2k's worth 1uz-fe's running- sounds sweet, drop me a pm if any one wants any info now id like a m90 37" tyres for the lux open to offers thanks jeremy

its like this if you dont want it dont buy it if im looking at something and im happy with it i dont mind paying what the seller wants eg alan wanted 20k for for his m3 i liked it- i brought it what im saying is, an item is only worth what some is prepared to pay for it Id pay 1200 for a manual coupe, geez its only money rant over theres a guy coming to have a look at it on sunday so the sales on hold till he decides and ispansbab from what i can see its got a crack in the window (window insurance time, or replace it yourself, takes like 1/2 h) and a few minor things im selling on behalf but ill get it on the hoist on sat and list all the faults i can find thanks

pics

my girlfriends little brother wants to sell his pride and joy so he can buy a set of 33" mud tyres ????????? any way its a 87 320i manual- i dont know if its factory reg on hold, no wof black in colour bodys quite straight for its age, paints faded in places all chrome seems to be there has one of those horible trademe euro mufflers on it would make a good m3 rep project or donor car id buy it my self (would go nicely with a lexus) but ive got to finish the lexlux (may even need to sell my e36m3 to finish it) m90 and 35"s here i come hes after $1200 im heading over to chch in a few weeks so i could drop it off??? contact me on 0277670726. pics tomorow jeremy

anyway back to the original topic yes you can make your SMALL motor a bit faster but will loose realiability you can do what i did e30 325i < e36 m3 or you can repower it im installing a 1uz quadcam v8 into an old hilux and would recomend it to anyone its been done before to a purple 318ti your wallets the limit. jeremy

try (dmclutches@ihug.co.nz) they quoted me 1800 -bimmersport discount for a e36m3 incl flywheel aslong as you up for fitting it jeremy

hi im after an after market exhaust or muffler for a 95 3.0L e36 m3 thanks jeremy

i had her out yesterday just like sex on wheels!!!! ive been using a bluebird attessa as a daily driver, no comparrison!!! price is negociable thanks jeremy