BM WORLD

any tyre dealers here that can help.

thats right and no they later stuff doesn't use that . double check the mian ecu temp sensor is all good ,

anyone have opinions on whats good value and what sort of millage etc you can get on them . will be 225/50-16" or maybe i buy some 17" alloys then go 225/45-17 or so . will just be on a spare set of alloys i can use on track days etc . for my e28

engines about $3 to 4K plus lots of bits . cheaper to do a stroker M20 . or maybe a 2.8L M52

i have 4 good doors , bonnet , guards , boot lid with spoiler , sun roof panel . then you will only have to paint the roof and rear quarters . also have option of 540i front brake ducts(that fit to front bumper) , or getting another mtec front bumper from a local wrecker(grey colour)some pics of the donar panels

or do a 3L crank into your M20 engine do some head work ,cam , headers etc etc .thna you dont have to worry about modifying everthing

they are probably tuned a little different ( i can unplug the trans computer and the engine still feels and sounds fine). but will still work ok , can always get them reprogrammed by gavin bellar if you like . i will try the the custom work shop in drury to see if they will do it .

yes might look into that idea once i have the engine out of the donar car . engine will run on the standard 540i computer no problems, will get a adaptor bellhousing plate made like this guys one . http://www.trademe.co.nz/Trade-Me-Motors/C...n-196605038.htm and have to make or buy a flywheel and clutch etc .

cheers guys . just one nut and bolt at a time . happy new year . sold the 540i now . looking at doing a e36 340i 5spd coupe maybe soon

http://www.trademe.co.nz/Trade-Me-Motors/C...n-197145144.htm offers around $1k 021433600

are you still keen for the friday 16th jan, testing day at puke

i have replacements if needed . 021433600 papakura

not to bad , not much worse than a 525i or 325i. pretty high geared . usees a good amount of torque to hold speed .

listed here. i basically needs a good panel and paint good . i have all the replacement bolt on panels in the same colour . mecanically its pretty good. interior not to bad . just needs a clean etc . electrics pretty good ,just a couple of things , have all the parts . would come up pretty good with a few days work http://www.bimmersport.co.nz/forums/index....showtopic=19945

i have a good 2l and a good 2.5l M50 and M50tu engines ,looms , ecu afm etc 021433600

http://www.trademe.co.nz/Trade-Me-Motors/C...n-196105229.htm

reccomend a 2.5L in a 325i etc , or if you what a 5 seires go for a 530i 535i or 540i , 2.5l are a bit gutless in a 5 series . i have a project 535i 5spd if interested . good mech, but body is rough , have replacement panels in same colour . about half your budget

ecu's are the same .

piston height like a F1 engine . not a lot of mass there!!

might have a mirror.021433600

http://www.trademe.co.nz/Browse/Listing.aspx?id=196686488 021433600

got wof ok , just needed to do a few things (exhaust , bulbs etc ), yes had some e39 17" m5 copy's on it which wobbled like a wet dog .bushes and steering ok (just the wrong wheels) .

funny engine ran fine here , . std e28 coolant botle is fine . just make sure you have bleed the air out and done get it too hot , they dont like it . e34 console is wider than e28 . yes put a better cable in if you need to. cheers

just lots of little things to tidy it up realy come and check it out if you like 021433600 k's are whats on the speedo , dont know what k's it came with from teh donar 535is . but these engines will do 500,000 if looked after . this one runs fine.

i run 235/40 17" all around on 8.5" alloys . as per MK motorsport specs . http://www.mkmotorsport.de/html_en/mk1_rims.htm http://www.mkmotorsport.de/html_en/e36_3er_rad.htm if i load the car up with people i might just rub the plastic inner guard at the rear over a bump, but no real problem. std 325ci springs did you buy my mates hamann wheels . nice wheels . would have brought them my slef if i didn't already have these. much better wheel than most of those asian knock things