polley

240 will need a manual e30 320 driveshaft . all the rear halfs are the same in e30, just the front that changes. 

$76 of brake fluid 

Leave it parked in south Auckland.  It'll get removed for free.

On 02/10/2017 at 9:58 AM, EURO V12 said:

Well... that's not strictly true, max torque is at 0RPM, torque reduces as RPM rise, power peaks in the middle, and efficiency peaks around 90%

It says at top of graph. PMDC. Permanent magnet dc. 

Completely different motor than what is being used in electric cars (which are ac )

Just have a look through the gearbox drain plug at the gears. Youll soon see

Dme either not getting powered up (main relay possibly?), or not getting crank signal (faulty cps or wired / plugged in wrong) . Or like you said sme is faulty  

Oh well new owner can do what they like

6 hours ago, will said:

Ok, definitely no spare diff cover, only complete 3.64 188 open diff.

Checked driveshafts off the car, both feel good, boots intact, not leaking at all. $150 for the pair. Have others in my container too.

Sweet ill grab the axles off ya mate.

Medium case rear diff cover

325 axles?

And people blame the government for the country's depression and suicide problems. Get off ya f**kin phone / facebook and go play outside.

You might be better off taking it to a mechanic that specializes in bmws. Might cost you less in the long run..

I've got a set of second hand ones, the wires might be starting to crack (just a guess, havent checked) but they are off a running engine. Would no doubt work fine if you're just looking for some replacements until new ones turn up.

Also have spare DME's, airflow meters, good throttle body motors etc.

Can delete ews for ya.

Was that you going some lil test drives down horotiu the other day?

Not sure they are very cheap. And with modern cars having 8 or so airbags, would prob write the car off.

Zzzzz

Looking for an E30 medium case diff cover.

I cant remember exactly how the unloader relay circuit is wired, but if youve wired the starter through it accidentally that would make a relay race and cause it to jump in and out rapidly.

On 02/08/2017 at 9:32 PM, Kepes said:

Broke my junk repco ratchet wrench trying to undo a wheel bearing nut.

Good - now I can justify getting something decent 

Who trys to undo a wheel bearing nut with a ratchet!? Thats what a power bar is for.

18 hours ago, Young Thrash Driver said:

@polley you made one of these up, didn't you?

I made a different shifter that doesn't use any of those parts.

6 hours ago, eliongater said:

I'm sure the s85 and s70/3 would like a word with you...

And what 750 or 850's came with either of those ? ?

9 minutes ago, Matth5 said:

You don't need to go inside to pay for fuel. Use the BPME app

Or go to Z if you don't need 98, and pay at the pump. 

Funny how cellphones used to be banned on the forecourt. Now they encourage it.

All they need to do is hire 1 or 2 more people to serve the fuel tills.

On 2017-6-24 at 3:14 PM, richard said:

pulling into a servo and all the pumps full . they waiting for their coffee fix.

 

Selling coffee at bp is the worst thing to happen ever. I dont give a fukk about coffee , but it grinds my gears when i wanna get gas and there is 2-3 attendants making coffee and no one to be seen serving the till for gas. Stand around waiting for kents to finish making coffee before theyll take my gas money.

It all works except for the econometer. Change coding plug to a 6cyl one to get rev counter reading correctly