hunter

i tried refurbishing mine 2 years ago, couldn't get good results / consistent finish so methodically, as budget allowed replaced them all with new ones.

this ensured factory fit with BMW OEM materials, color and quality.

6 hours ago, NZ BMW said:

Annual spark plug change? Why such frequency?

I Pull them each autumn to check condition before winter, if they look worn ad there's a special on i'll swap them out. a few weeks ago i did this and they looked a bit pitted, so yesterday i changed them.

One did have a bit of oil on it which i havent seen before, might be a gasket needs changing somewhere

After much  drooling over a stunning e39, i've decided to keep my e46.

So got to doing annual spark plug inspection / change over, during which i noted one headlight had got some condensation from being parked outside for a week. (we are painting out kitchen too, so, many, projects)

During taking out a bulb to vent the headlight, the bulb fell out of its socket and dropped down into the engine aby / bumper / under tray area.

After a lot of  searching and removal of air filter housing and front spot light i found the little bugger in the bumper underneath the spotlight housing.....

next little project will be sorting out my moist head light, will pull apart ad check the seals...

On 2/18/2018 at 10:34 AM, Olaf said:

Araldite or similar epoxy?

maybe, its the whole area around the screw has shattered, approx size of 20 cent piece, my Araldite skills leave a lot to be desired:)

maybe if i could remove the glove box hmmm

Went over the interior of my e46 with  screwdriver and tightened all the interior trim screws i could find to minimise rattling. some good results, not dsh squeaks and less random rattle in my ears whilst driving,, nearly no rattles at ll now so i'm happy..

However discovered the glove box interior has a big crack in it around one of the screw points not sure if replaceable 

E46 drivers set M sports type. 

Will fit all E46 models 318,ti, 320, 323, 325, 330i 

Torn side bolsters on right hand side, not too expensive to repair, just had another lower side bolster repaired for 170 at local upholsterer. 

has complete plugs for airbag sensor in seat bottom, seat belt and all adjusters work. 

Collection only. 1 dollar reserve

http://www.trademe.co.nz/Browse/Listing.aspx?id=1258520907

Curbed a wheel - laaame

had my lower drivers seat side bolster foam and cover replaced at Waikato Motor Trimmers, great turn around time and good quality job.

new rear window regulator last week, thanks to SD Euro. Next on the list, wash it for xmas. If painting the house doesn't take priority this week / weekend.

was behind you in traffic around Tristram street last week mate on my bike, car sounded really nice.Looks good on thoce black wheels too.

On 8/2/2016 at 1:41 PM, sweetm3 said:

Check out my project   

ohhh where are those from? didnt think you could get them in NZ

looks like liquid metal, hot stuff!

Looks great mate, I also had some issues when I went for Alcantara shift boot and hand brake boot, went through a US company and the wrong items (and color) showed up, from Poland lol. 2 more attempts and returns had it sorted haha. 

It can be a long road chasing what you want when it comes to the right parts for the right car.

Purchased some genuine BMW roof racks for 3 & 5 series, got em for a real steal. Now they just need a clean.

Looking Faaaabulous as always Amber

looking at reverting back to stock springs and have lost my original ones when moving house.

Have a 2001 E46 sedan, currently running H&R and finding them a bit harsh especially with a little baby on board.

Bit late to the party, but those seats look epic!! Love them man, nice as touch.

Damn short syndrome, I wouldn't even be able to see over my dash if I didn't have my electric lifters... hahah.

you could get a recaro booster

http://int.recaro-cs.com/child-seat/recaro-milano

Not sure on exact model mate. I've had these seats in another car for a year or so, and love the balance of comfort vs support. Way more comfy than my old fixed back racing seats, and much more supportive than OEM M3 ones. Plus they look <3 in full alcantara.

They don't bolt in directly, you need aftermarket floor mounts, as well as spare seat & airbag occupancy sensors from BMW (unless you're happy to hack up your OEM seats). The added bonus of aftermarket mounts is you can interchange a variety of bucket vs reclining seats with ease.

it just so happens i do have a spare set of seat and believe the sensors are all in tact hmmm, i'd love a set of these one day...must add to list.

If you don't like the wing you definitely won't like what's coming next haha

Recaros1 by Christian Taylor, on Flickr

Wow those look awesome , what model / type recaros are those mate? are they direct bolt in?

Hey Amber, how's those new rimz coming along, arrived in NZ yet?

sorted the random looseness in my e46 sports seats, little T25 bolt up under the seat back side bolster material was loose, bit of a mongrel to locate. all good now after puling seat out and tightening all loose nuts and bolts.

keen to keep an eye on this, developing a soft spot for E34's

great shots, the exposure and processing really captures the urban environment well. Cars and driver look good too

I run the Nexen Nfera SU1, really nice for the price. good levels of all weather grip and very quiet. I have them in 18"

://int.nexentire.com/product/prod_view.asp?prod_id=P49

this anti rattle DIY might help you out. When i pulled my rear deck to fix rattles the double sided tape under the rear plastic trim helped a lot.

http://forum.e46fanatics.com/showthread.php?t=880622&highlight=rear+deck