Jamez 2147483647 Report post Posted April 18, 2009 (edited) Update No pics till tomorrow night Today I; Swapped Bumper/Boot over Removed Dash's from both cars Put a front windscreen in put back seats in took pods off the 325i to send to Frantic put a fuel pump in started to remove pedals for the swap to manual put on taillights Total Time 5hrs TO DO Tomorrow; Swap Pedals Over put dash in Finish off putting windscreen in (the rubber inlay bit) put on front guards put headlights and front bumper on swap driver seats over get rid of automatic gear changer Prep for engine swap TO DO Monday Get Engine and gearbox out of 325i Put brake booster in 320i TO DO Tuesday Put Engine and Gearbox in 320i Swap Rims and rear sway bar over TO DO Wednesday Anything that gets forgoton swap Diff's go get quote on re-spray TO DO Thursday Get a WOF and REGO. If not being painted, otherwise Friday TO DO Saturday Go on Anzac cruise. James Edited April 18, 2009 by Jamez Quote Share this post Link to post Share on other sites
e30plz 1 Report post Posted April 18, 2009 You're gonna have a busy week, Good luck. Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 18, 2009 keep hitting dead ends how do i get the break and clutch pedal out without taking off the accelirator, from what i can see its welded on how do i get he front tech2 kit off? the plastic clips at the bottom are proving very stubborn this is turning into alot of work will probly not have it ready in time for the Anzac cruise at the rate im going Quote Share this post Link to post Share on other sites
Antallica 15 Report post Posted April 18, 2009 will probly not have it ready in time for the Anzac cruise at the rate im going Not what that attitude lol... get back in the garage! Quote Share this post Link to post Share on other sites
QuickSilver 0 Report post Posted April 18, 2009 There is a long bolt that runs through the brake clutch pedal, just unclip the accelerator pedal (behind the pedal) there should be no welding, they come out in about 5 minutes. Just undo all the bolts and slid out the long one and they come free. Quote Share this post Link to post Share on other sites
bimmer boy 21 Report post Posted April 18, 2009 Get it scanned. A hammer also helps Quote Share this post Link to post Share on other sites
westy 614 Report post Posted April 19, 2009 Dont forget to check your sparkplugs. Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 19, 2009 (edited) Update didn't have much time today to work on the car as i had to go out to breakfast with the girlfriend then helped her move house not much done to the 320i got all the tech2 off the 325i will have all panels on the 320i by 9am tomorrow. the engine is pretty much ready to lift out, so might be in and going by tomorrow night, at this point in time I can see myself being ready by the Anzac cruise, help permitting . took some pics but it was pretty dark, so no good ones, will make sure i take some goodin's tomorrow. so stoked im swapping all the bits over, the 325i is a rust bomb, the whole car is rust and has bog EVERYWHERE. it would of never complied. on the otherhand the 320i is immaculate and for reference, the 320 is the car with no steering wheel on the left and the steering wheel in the 325i someone can have if they help ( its pretty worn tho) pretty much if you help me you can take bits off the 4door and can someone please please swap the pedals for me ill give you a door as a memento , i just cant do it. I HATE THEM Edited April 19, 2009 by Jamez Quote Share this post Link to post Share on other sites
bravo 35 Report post Posted April 19, 2009 OMFG! how do you get anything done? You must be forever losing things and falling over stuff. Pedals are simple. Remove the hinge pin, swap the pedals over. Done. Quote Share this post Link to post Share on other sites
Eagle 1662 Report post Posted April 19, 2009 Haha yeah you messy bastard Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 19, 2009 (edited) haha all that junk goes out onto the driveway each day so i have working space zzzzzzz i must be thick or something, everyone says its easy but i keep missing the boat will give it another go first thing tomorrow morning. Edited April 19, 2009 by Jamez Quote Share this post Link to post Share on other sites
Forrest 35 Report post Posted April 19, 2009 This is looking awesome, good work James. Keep cracking Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 20, 2009 Update: finally swaped the pedals over got the dash back in and pt some panals on Tomorrow is the day when everything is going to happen, as it wont be a one man team anymore more like 2 so thing should happen alot faster all that's left to do is put some front seats in put the engine/gearbox in put the Tech2 kit on/fixed get it paint'd Quote Share this post Link to post Share on other sites
bravo 35 Report post Posted April 20, 2009 Sweet - the trick with a 2-man team is no beers till the work is done. Or else you end up with lots of empties and no work done. Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 21, 2009 UPDATE engine in but not wanting to start........ made a thread for helping me............ Linky Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 21, 2009 Update CAR GOING WOOT WOOTT OWTOWTOOWTw stuff still too doo Put front seats in Put Mtech2 kit on Change front and rear sway bars Change front and rear springs, its riding so hight currently Change diff Put Exhaust on Finish of Wiring, cover it all in tape so it looks nice Bleed the Clutch Give it a good clean Get a WOF and REGO Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 22, 2009 Update decided to let the breather for the fuel tank just sit and do nothing Car is go befor i get a WOF and active the REGO I will have to mount the front Tech2 valence properly fix and mount the rear bumper put brake light switch on the pedal and after that i'll do the small things before the Anzac cruise like.. swap over sway bars and suspension swap over diff ect.... not going to have time for the car to get painted so it will look pretty rough on the cruise........ Quote Share this post Link to post Share on other sites
bravo 35 Report post Posted April 22, 2009 Cool - feral e30 > tidy e30 anyway. Quote Share this post Link to post Share on other sites
westy 614 Report post Posted April 22, 2009 All e30s are feral. Some just have shiney paint. And resize your pictures man! Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 22, 2009 i resize to half of what they were Quote Share this post Link to post Share on other sites
westy 614 Report post Posted April 22, 2009 Really? They're still huge! Anyway, hows it drive? Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 22, 2009 havent taken it out for a drive got no petrol lol, and still have to mount front bumper, then i'll get a WOF Quote Share this post Link to post Share on other sites
Guest Simon* Report post Posted April 22, 2009 Woohoo have you done a skid yet? Quote Share this post Link to post Share on other sites
Jamez 2147483647 Report post Posted April 24, 2009 k so i got a WOF and REGO today so it will be going on the cruise will get some pics on the cruise Quote Share this post Link to post Share on other sites
QuickSilver 0 Report post Posted April 24, 2009 sh*t dude, congratulations, thats a huge amount of work in record time. THUMBS UP! Quote Share this post Link to post Share on other sites
