BMW V8 engine M60B40 181,000km nz new

[BM WORLD 1283]

selling my bmw v8 engine from my nz new 1995 540i touring

if anyone is after a good loiw millage nz new engine

http://www.trademe.co.nz/Browse/Listing.aspx?id=647307624&ed=true

$1400 to you guys

021433600

papakura

also have the matching 5 speed auto trans $1000

http://www.trademe.co.nz/Browse/Listing.aspx?id=647309748&ed=true

make a great package for a e30 e28 e24 etc

Edited October 5, 2013 by Brent HARTGE535i

[Michael. 2313]

This would look nice in a 3 series.

[jeffbebe 1559]

what's going to replace it, Brent?

[lord_jagganath 421]

M62B44. gosh I would love this engine to go into the touring .... but mountings.... :sigh:

[jeff002 23]

He has exp to do this engine replace.manual touring is coming

[BM WORLD 1283]

yup just a M62B44 and 6spd to go in its place.

and yes the m60 will mount up in your 525i touring , will need a few other parts to make it all go , but nothing is impossible

[Michael. 2313]

yup just a M62B44 and 6spd to go in its place.

and yes the m60 will mount up in your 525i touring , will need a few other parts to make it all go , but nothing is impossible

Thats the spirit.

M62 E34 Touring will be a real package Brent! Would this require a cert?

[BM WORLD 1283]

Thats the spirit.

M62 E34 Touring will be a real package Brent! Would this require a cert?

i dont think so , looks stock , and only a small increase in cc's

[jeffbebe 1559]

yup just a M62B44 and 6spd to go in its place.

and yes the m60 will mount up in your 525i touring , will need a few other parts to make it all go , but nothing is impossible

Very nice!

[BM WORLD 1283]

some more pics

Edited October 9, 2013 by Brent HARTGE535i

[robert.fowler 0]

will still need cert as not the original engine or trans

[BM WORLD 1283]

bump , out of the car now ready to go if anyone wants nice low km nz new V8 .

[Ahmedsinc 414]

will still need cert as not the original engine or trans

LVV Certification is always required for any engine or drive-train-related modifications unless specified below: (if modification

does not appear below, always refer to LVV Certifier)

Fitting of or modification to:

LVV Certification is not required provided that: (refer to LVV Certifier if beyond threshold below)

Substitution of engines

 When compared with the OE engine, the replacement engine:  is of the same or less cubic capacity; and  has equal or less weight; and  has the same or less power output; and

 uses the same fuel (petrol, diesel, LPG, CNG); and

 uses the same unmodified attachment points and system (ie bolts-in); and

 uses the same family of block and cylinder head from the same vehicle manufacturer; and

 is of the same configuration.

Reckon you'd need to have a trainspotter of a WoF inspector to pick up the difference between the B40 & B42!

But yes, technically it should be certified However if the vehicle has been converted from auto to manual using ONLY OEM parts and with no modification to the car it does not require certification. I had a good long chat with the certifier the father-in-law uses before commencing on the 325i conversion.

Better safe than failed!

Edited October 29, 2013 by Ahmedsinc

[BM WORLD 1283]

BUMP!!

engine and trans is ready to go

[jeff002 23]

ok,I knew it now.

LVV Certification is always required for any engine or drive-train-related modifications unless specified below: (if modification

does not appear below, always refer to LVV Certifier)

Fitting of or modification to:

LVV Certification is not required provided that: (refer to LVV Certifier if beyond threshold below)

Substitution of engines

 When compared with the OE engine, the replacement engine:  is of the same or less cubic capacity; and  has equal or less weight; and  has the same or less power output; and

 uses the same fuel (petrol, diesel, LPG, CNG); and

 uses the same unmodified attachment points and system (ie bolts-in); and

 uses the same family of block and cylinder head from the same vehicle manufacturer; and

 is of the same configuration.

Reckon you'd need to have a trainspotter of a WoF inspector to pick up the difference between the B40 & B42!

But yes, technically it should be certified However if the vehicle has been converted from auto to manual using ONLY OEM parts and with no modification to the car it does not require certification. I had a good long chat with the certifier the father-in-law uses before commencing on the 325i conversion.

Better safe than failed!

[jeff002 23]

is it m60 has better intake manifold??

[BM WORLD 1283]

is it m60 has better intake manifold??

same as early m62 non vanos engine.

but yes will flow more at high rpm than the vanos m62

Edited November 27, 2013 by Brent HARTGE535i

[BM WORLD 1283]

bump anyone want a nice new low km m60b40 v8 engine and trans??

[Andre3000 55]

Damnit Brent if only i had the cash right now i'd be throwing that in the touring. Got stung with some hefty fines/charges after some spirited bike riding... If you still have the engine and trans in March look me up.

[Rob HB1 90]

Looking for e30 325 manual facelift, coupe or sedan.