Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 06/14/23 in all areas

  1. 3 points
    216Ms are the wheels to get for a 130i imo. My project I've been working away at recently.
  2. 2 points
    Thats what i use it for. As a note Bimmersport would be pretty much dead for new content if none of us did. Only really the regulars who may do that. Im sure there's many members or vistors who view\read but dont post\contribute etc, so not the best indication.
  3. 1 point
    Yeah I'm thinking that I'll probably go down this route. The current silver trim I have is absolutely flawless, so thinking that I'll sell it on to someone who wants the silver and then replace with a new set of Titan Shadow rather than painting over trim that's in mint condition. I don't have to do the door handles as a previous owner had them wrapped in leather/pleather and it's actually a pretty decent job and wears well, so will probably leave as is.
  4. 1 point
    LCI 130 auto for sale on faceballs, looks pretty average but has BMW P wheels/front/intake/muffler(?) Nearly worth buying to pull the shiney bits off.
  5. 1 point
    Of the 33 cars I have owned six are BMWs, from an E12 528I to a genuine C1 Alpina (not a sticker car) to an E36 Me evo. Currently messing around with my son's E90 323i and a poor E46 that needed rescuing.
  6. 1 point
  7. 1 point
    doesnt look to be a lot of interest in keeping this thread alive, never the less, it serves as a good build diary for me in the future, and prehaps the next own if it is ever sold ! had a quiet afternoon around march or so. had some black leather seats from an E53 parts car. The bolt pattern is identical across E38/E39/E46/E53 so spent the afternoon getting these installed. This 320d had poverty pack seats, was surprised to find it wasnt even prewired for electric or heated seats which they usually are. Not too fused about the heated seats, but had to run some wires to make the move/recline etc work, and also swap the seat buckles and pretensioners over I also got an E39 540i motorsport parts car in recently, which had a set of 18" M Parallels which were quickly pinched. The photos make them look tidier than they are, could do with a professional refurb, but look the business! Fitted brand new tyres to make them work (as the E39 tyres were much too big) as well as hubcentric spacers, due to the E39 center bore being slightly larger than all other Exx BMWs for some strange reason! The front work perfectly as is. The rear i had to roll the inner lips of the gaurds in, trim the wheel well liners a but, and delete the front most of the side brackets for the bumper. the rear shocks had visible corosion around the top near the upper mounts, so also replaced those. Sorry to the purists that only fit Bilstein etc, off the shelf items at BNT will do for this car. lowered back down and gave it a drive, no rubbing anywhere. over the past month has done a lot of miles loaded to the brim with gear for the shows Im doing for ACT, and no rubbing anywhere. Great result! forgot i had some BMW plates and found one day in the shed, so fitted those up as well. While it had a pitstop in Hastings last week, Greg at GH Automotive swapped the engine mounts for me. Left side easy peasy, right hand side a bit of a pain with a turbo tucked in there so you need to drop the frame to do it. Also discovered the vaccum hose to the wastegate was disconnected, and hooked that up. turbo whistle instantly sounded WAY better. as the EGR and DPF has been deleted many moons ago, its only the back box doing the heavy lifting. However, with that hooked up, the car would no longer go over 2500rpm. just to test, re-disconnected (is that a word?) and worked perfectly again. freeboosting isnt as much of a concern in diesels as it is petrols, providing the engine is healthy, so thats a good sign! I have ordered a new boost solenoid for it which should solve!
  8. 1 point
    Surely someone has some for you! 😭
  9. 1 point
    Still yet to hit the 300,000km mark... blame weather and work... so engine etc/etc/etc/etc still sitting in workshop Took it out for a blat though, to remind myself why I still have it, fecking awesome fun on an empty B road.
  10. 1 point
    They're also really not very expensive just to buy new from memory. That's what I did. and then painted the door handles with GM8573, it's almost a perfect match for the OEM colour. Picture below of my painted door trims next to a brand new dash piece from BMW.
×
×
  • Create New...