mr E34

You are putting approx 230hp down at the wheels, 172kw x 1.34 = 230hp.That is pretty good, other 3.0 M3 owners would be similar over a small range + or -

If you guess ( & that is all you can do) 20% max drivetrain losses, 20% + 230hp = 276 hp @ flywheel.

Factory claim 286hp don't they, so that is within range.(morerevsm3 in Aussie started with 170kw on roller dyno)

The Sport Evo was called Evo 3, this last series was built with 2.5ltr engines. (238bhp@ 7000rpm)

Never seen one of these for sale anywhere.(600 units)

The ULTIMATE M3!!!!!

Will post later if i have time an Evo 3 article, all about the extensive mods. (that right drive doesn't count anymore)

Going sideways in the thread here, but do you know about the italian 320is? Been looking at these for a while, basically a M325i shell LHD, loaded to M3 spec but a 2.0ltr engine. They seem to be sought after and sell very quickly.

Have a look at this one.

http://www.pistonheads.com/sales/694761.htm

When do the E36/E39 etc headers arrive Wayne?

Sorry mate, but the only way to know flywheel power is if you remove the engine & place it on a bench engine dyno.

Those dyno calculations are way out, thats what all the guys in the know told me.

So how much in NZ$ is 1085 euros? I could be quite keen.

$1085 divide by

.46

=$2350 approx, depends on the exchange every day.

These guys sell nice carbon intake systems for E30 M3/ E36 M3/ E46 M3. If i had an M3 this would be my first enhancement, you need to get as much AIR into the cylinder.

I wouldn't butcher the loom for aftermarket ecu, i would simply piggy back Mapecu 2 for fuel & timing.

http://carbon-airbox-bmw-e36.bmw-airbox.com/

Didn’t the US cars only have like 190 KW?

I think the lightweight version was a stripped out euro M3 made for US racer schools.

mine started with 170rwkw stock except high flow metal cats, then with alloy flywheel, free flowing muffler, 8000 rpm alpha n chip, and carbon plenum got me to 200rwkw on dyno dynamics, aftermarket cams would net more as well

the M3R was the most powerful production M3, it is 3 litre rated at 240kw...

There is your answer, someone who has done it with a whopping 30kw@ wheels increase.......save up for a carbon intake system & go for full custom remap.

The USA only lightweight version was only 0.3 sec better, it's all academic, you can loose that & more on a bad start or gear change.

As everyone knows when you get down to those times you need a lot of power to chop 2 seconds off!!!

Whats been said is basically correct, there was a GT version of the M3 which BMW built & it only had another 9bhp?

To get more power you need more air in the engine(the hard part), more revs. Fuelling is the easy bit.

Even if you dropped 100kg you would only lower your 0-100k time by a few 10ths of a second, why bother?

edit out 100ths, should be 10ths

M3 GT Advert.

http://www.pistonheads.com/sales/697192.htm

Thought you E30 guys might like this BMW Car Article.

I would say you have been over that car as if it was Pamela Anderson!

Now all we need is 100 Bimmersport members to come up with $750 each to buy it??? Well we couldn't get 15 + for dyno day @ $60 each. Enough said!!!!!!

Or this perhaps?

That looks top notch! Who built that??

I take it you mean the ITB's?

This can be yours for $4459 NZ + Shipping

That is a lot of money but at least you only need to buy it ONCE! (still affordable if you add up all the other dopey mods people waste money on)

Has anyone on Bimmersport built a M20 2.8ltr? I have a friend who wants to build one, any feedback please.

Another option is to go to Auckland Performance Tuning (APT) in Papakura.Lots of experience out there also.

My offer for immediate sale without pull thru maybe's is NZ$1000.00

For the cost of a night out you may as well subscribe for 12 mths, 57 pounds for this part of the world. If you like BMW's why piss around.

These would look amazing on my 850CSi. How wide are they? If they are 9" and 10" then I will be very keen.

Eh? When i suggested a set of Alpina's on your E31 you said you didn't like them??

That's a sweet rebuild. What sort of numbers would you expect from the rebuilt motor. I've been humping along with plans for some low supercharged boost, but this looks like more fun, and I have a feeling it will go a fair bit harder than a 2.7 and can always boost it later.

I agree, looks alot better than a 2.7. I would say with full mapping you should be around 220-225 hp @ flywheel??

It is too dear for the content but subs work out approx $10 less than the price you paid.(next issue has more E30 2.7 build)

This may help.

http://www.msportster.co.uk/faq.asp?FAQ=25

Plain noodles, load of bullshit. A billion cells die everyday in the body & are replaced with new ones, that means your new cells are nutritionally supplied with crap noodles.