HELLBM
-
Content Count
2978 -
Joined
-
Last visited
-
Days Won
104
Everything posted by HELLBM
-
Can do..
-
Have some. What are you after?
-
Complete M Tech 1 Kit (front, rear sides and boot) $950 Like this:
-
Have one if you have no joy..
-
E30 2.7 Cylinder Head For 1989 325i Motorsport - Casting No. 1705 885
HELLBM replied to BMWQT's topic in Want to buy
Have some... -
Let me no if you have no joy.. $20
-
E30 325i manual (Ray, I'll give you a call about your white 325iSE if you still have it) Hi Mark, White one is due out of the paint shop any day now. Giving it a complete freshen up back to showroom cond. Post pics when it gets back home.
-
Got some. call me if you have no luck elsewhere...
-
Scan first to eliminate the electrics. If checks out ok replace the check ball in the valve body. Possibly stuck or sucked thru into the body. About $7 from eastern`s (ZF Specialists) in Newton (Auck) A common problem that is often overlooked. Fixed 3 by this method and saved thousands...
-
Bavarian Motors have done some for customers. All pleased with the result. Have a few manifolds if you or anyone else is interested.
-
Try forum sposor Gavin (Euro-Italian ph. 09 4449817) Regards Ray
-
Have a few coupes at the moment. Give me a call. Regards Ray
-
Have a few coupes at the moment. Give me a call. Regards Ray
-
Thanks guys. More eyecatching stuff to come...Watch this space.
-
Brent is correct if yours is pre-facelift (motronic 1.1) If its facelift (motronic 1.3) then the crank angle sensor on the front of the block can only be positioned in one place. The bracket takes care of that. The front pulley will be toothed not smooth like motronic 1.1 Check all of your plugs especially the one under the inlet manifold. Take your pics a bit smaller and clearer. The blur dosn`t help identification.
-
have what you want. Nth Shore
-
Have everything you need to sort it. Regards Ray
-
PM`d regards Ray
-
3.64 is $800 from HELLBMRay 0212435526
-
All the best Josh. Have a reat day... and night... Ray at HELLBM
-
525e and 325 pfl are the same Getrag 260`s but with different sized output flanges which leads to a need for different sized drive shafts. Been down this road before and is not an easy change over. I have preflift 325 conversion kits as discussed. Have sold some 525e man. boxes so they are out there somewhere. Keep looking.... Regards Ray
-
Call or text me for the parts you need.Regards Ray 0212435526
-
Tell `somone` to call me.0212435526
-
Make me an OFFER means just that. Something like current market value minus 15% Bimmersport discount. Need it gone asap....