M M

I vote without center cap. They're going to look good on there. Sorry about the delay with measuring the driveshaft, finally got some time today. It was 1550mm (might be +/- a bit as the exhaust etc. is installed so couldn't get the tape 100% straight)

Cool thanks. If no one has one here that'll do. Doesn't have to be the BMW emblem, can be whatever I just need a gearknob really (shifting with bare stick at the moment).

Looking for a gearknob like the one in the photo.

Not that I'm aware of, only difference is that it's smaller. Maybe it will boost slighly less but will be perfect if you don't have much space. Send me a PM if you are interested and I'll see if my friend still has it.

That's a good point, I was unaware that that's what it does. I was planning on pulling the wiring out when I change the carpets and do the heaterbox anyway. However I thought it might help him to make sure that he doesn't have some other issue as well. Eliongater, I will measure it for you but it might be on Monday at the earliest as I have a bit of a busy weekend. Hope that's ok.

Look at this guide, it's what I followed and it worked: http://www.mye28.com/tech/DaveKanTransGuide/ Pins 2 and 3 at the plug of the auto shifter in the car.

I would do the m30, you could probably sell the eta motor as well (someone with more experience could confirm this, I'm not sure what they're worth). Which pins did you jump? Tell me the wire colors too, mine were 3 brown wires, two of which had black stripes if I remember correctly.

It won't start from the key because you probably haven't jumped the wires at the auto shifter switch for the lock out (have you?). Once I had the flywheel on right, mine sounded pretty much the same without the exhaust on so I think it's correct.

Getrag 260/5 and matching driveshaft off a 525e. If I was you I'd just get a M30 and put it in, you may as well if money isn't an issue.

I pulled the gearbox off today and took the flywheel etc off. Sure enough, the dowel came off on the thread of one of the bolts. Have no idea how I actually missed it the first time round or how I even got the flywheel on there. It was however only one bolt off which is why it ran I guess, but barely. I have no idea what the hell I was looking at when I did it last time. Guess my mind has been all over the place lately. Anyway it's all back together now and runs fine so I'm happy, even though I made a massive idiot of myself. The car does have some unrelated underlying running issue because it has been using quite a bit more fuel than it should (before the manual swap) and runs really badly on the replacement AFM which I got which hasn't been touched and is off another 525e. It will only run correctly (if you can say that) on the AFM that came with the car which was tampered with and I have adjusted a lot to try and get it running semi respectibly. But that's a minor problem at this point and for another day. Thanks very much everyone for your help and replies.

I know of someone with a diesel Mk2 booster, rather small diameter (smaller than regular mk2 one). Assuming it's a size issue, is that what you are after?

Here's a video of how it's running: For when I do the flywheel, can anyone tell me where the reference mark needs to be in relation to TDC? From what I can find it needs to be at the sensor when the engine is at TDC, is that right?

It's quite hard to explain but it's not really a missfire, more a consistent but rough idle, almost like how some of the American v8s sound when they have aggressive cams. I'll try and take a video of it tomorrow and post it. Occasionally if you leave it it will run for a while but will not exceed 400rpm and will not rev at all, as soon as you give it throttle it will stall. I'm not sure what you mean by shorting out plugs. I'll do the ressistance test on the plugs and see how it goes.

I will check this however I don't believe the e28 needs this. I think it's safe to say it is the flywheel at this point. I just went and checked the auto flywheel/ring gear/whatever the auto one is called and the holes are all definitely evenly spaced, so more than likely the flywheel is on wrong. Guess it'll all be coming off again. I feel like a pretty big idiot for not checking this, and I'm not sure what I was looking at, thinking they didn't line up. Does anyone know if the flywheel is way off does it mean the car will not run at all? Does the fact that the car starts mean that it is likely only one bolt hole off (if it is infact the flywheel)? It doesn't make much difference but I'm curious to know for future reference. Thanks for all the replies so far.

I believe I did. To me it looked like it would only go on one way in relation to the holes on the crank. I'm not sure what you mean by sleeve to locate it. *Edit: Just saw in my Bentley what you meant by sleeve. Mine didn't have that, but I'm sure that two of the holes were closer together only allowing it to mount one way. I rotated it to check and they all only lined up once (at least I thought they did).

I put in the sensors that I got with the manual gearbox. Made no difference.

Could be but if all etas use the same flywheel then it should be correct since this was from an eta. So it is possible that the autos and manuals use different sensors? I think I'll just go swap them anyway as I have the manual ones.

I spent the last few days converting my 525e to manual. All went well, everything went together fine, but when I went to start it, the car idled very low, between 200 and 400 rpm and any opening of the throttle causes it to stall. Most of the time it stalls itself if you leave it running for a bit (usually within 30 seconds). The idle is quite rough, feels like it's only running some of the cylinders. However it has no problem actually firing up, starts like normal. I've spent the day today trying to disagnose (after putting it all back together), got another AFM off a 525e at pickapart but that made no difference. It is getting voltage to the plug. It makes no difference whether the TPS or the AFM are plugged in or not. There appear to be no vacuum leaks and it seems to be getting fuel (for one you can definitely smell it). Does anyone have ideas what could have cause it to do this? I don't know if it is related to the auto to manual swap or not. The only thing that I can think of is the sensors in the bellhousings. I used the ones that were in the auto box already on the car, will they work or do I need to swap them out? Thanks to anyone who can help. *Edit: I was told buy the seller that the manual conversion came off another 525e, so it is all correct for the car.

Haha. Yeah that was me, it's hardly mint though but thank you.

A really nice looking black e30 4 door with gold centered BBS RS wheels on Ladies Miles this morning.

Very nice. I much prefer pre-facelift e30s.

Bump, still have this.

Gone.

Just took these out of my e28, won't be needing them so if they are any use to anyone you are welcome to take them. Otherwise I'll throw them out in the next few days. Might be good for rails or frames or something, fabric isn't good really. Pickup in One Tree Hill.

I am after an AFM for my 1985 525e. Part number of my current one is 0280 202 040. Needs to be in good working condition and not messed with please. Thanks.