Jibs05

250 for the motor 30 for the head lights!!!! need funds for bushes!!!!

Not today but yesterday. Fitted wheels, nardi wheel.

So got some of the driving issues sorted... well actually they managed to sort themselves out... funny that. I have a sneaking suspicion its one of the ignition coil packs. Will do more tests. The car doesn't like running cold. it hesitates when the throttle is pushed, but when its warm it drives normally. And still get a missfire at idle. All small things but will need to get on it sooner than later. havnt posted a pic in a while. so enjoy.

Went to garage heaps, yet to see your pretty face. Btw took your advice, got a haircut. im still battling idle and driving issues, although after testing the AFM leads me to believe its sh*t itself. On the hunt for another now.

After the air flow meter as above. contact 02102505063 cheers

lol maybe sunday, when i get back from tauranga!

Update, finished the exhaust, just missing a two bolt flange gasket, but it went O.K! Next is to sort out the inconsistent idle. I think its the ICV or maybe a vacuum leak. Also when i give the gas a little tap it seems like the motor is going to stop. Will do a little reading and see what i find. Pics will come soon!

Hey man its looking good! Very clean, compared to my... well... yeh. Btw Ive got e34 smilies on my e30.

Hi does it have the engine harness covers on the fire wall? cheers

Ive welded up the manifolds, its from the outlet of the manifolds to the 2.5inch y-pipe that I would need help with.

Sorry not brand new.

bump!

Thanks mate! ahh that sucks. I know the feeling when the engine in your car takes a sh*t. You have a PM. On another note, any recommendations on where to get my down pipes sorted? I know a guy just up the road from me, he did my mates 24v exhaust system but its leaking from the flanges now. I live in onehunga area. cheers

E30 coupe door? cheers

How is the MAPECU? I really want to use it for my 3L stroker.

Thanks! They are slightly too large for my arches, going for 15" now. You have a PM

I hope so! cheers! thanks! I will hopefully be buying a MAPECU3, but for now im going with the 2.5 ecu, fuel reg and a wideband. Cheers! Oh its up there! Thank you! Yeh it makes it hard to find parts. The wiring is half facelift and half pre facelift. Quite annoying. Its a jimmy hill front lip. Apparently quite rare. Cheers! Thanks!

Hey thanks man, your vert is something to be desired! Nah no 5 stud conversion, made up some adapters at work. The BBS wheels are off an e38 16x8 style 5. With the effective offset of -5. If you are going stretch then yeh it will work. Bridgestone 235s made me cringe over every bump, sharp learning curve. Should do a cruise when this is done. Keep in touch! cheers

Hi all just documenting a few things I am doing to my E30. Have owned it for a while now. Story was it started its life as a auto 2L owned by a sweet old lady that lived out at Huia. Bought it off her a year and a half ago and stuck with it until now. Body is quite rough but i got it for a really good price. Enjoy! We will jump ahead a little, my friends and I finished the manual conversion and also installed Koni sport shocks with lowering springs and a thicker front sway bar. Got some wheels and tires and this cool front lip. Got some smilies, blacked them want to get french yellows for the highbeams at some point. Bought a Rogue short shifter and made a DSSR at work for it Bought some 16" BBS wheels put them on to see how they ride, if they rubbed much and what not. Then sh*t started to get really serious. (Thanks ray@Hellbm) Installed the Shifter rod and shifter to see how it worked. Some rust being attended to Goodies arriving Factory Honing marks FTW Cleaned and painted so while that got taken care of I got on with other things... These 2 had a date with degreaser and a hose Moved house, this is where the magic will happen Starting on the manifolds also started prepping the m20 for removal All done, didn't take long maybe half and hour? Starting to pull the motor Its coming up Built in load leveler FTW! Its coming up! All about angle And out. Le me in engine bay pic (Big thanks to marcus who helped a lot with this) Fitted the Clio booster and Condor engine mounts Then this magically appeared So we got on with putting it in Adjusting the angle I had a fever, so i took many things to keep me going. Getting there Ahh its in. Ahh no its not. That's better. I don't know how to embed. I got it wired up, didn't take very long. Maybe 2 days of trouble shooting, but its was all simple things that i overlooked. http://youtu.be/0vT7jQQLmbw And now we are here. Things to do Throttle cable down pipes Thanks for looking! :thumb:

More stuff for sale bump!

Clutch for sale bump!

Motor is out ready for collection! includes ECU! BUMP

m20b20 for sale! bump

update bump

I have F/L Smileys on my PFL