musccoo

Set of rally/track wheels all in good condition. Come with Federal FZ-201 225/45 semi slicks all decent tread. 4x100 with 57.1mm Center bore (bmw e30) 17x7.5 with et13 offset No longer needed so up for sale $1000 Pickup Auckland - text me 02102464084

Have a set of e30 basketweaves 15x7 including all center caps and 205/55 tyres with heaps of tread. Held onto these for ages but figure someone else probably wants them. I put BBS center logos in because I liked the different look $1000 Pickup Auckland - text me 02102464084

Sold

Lol didn't know this thread came back up. Just for interests sake I bought a red46 one some time ago and its pretty decent. Ain't no rally sump plate but protects most scenarios for street car - If you welded a bar in chassis rail to chassis rail and bolted to that then it would be solid af rally spec haha. But yeah if someone wants to replicate it can borrow it, don't mind

I have a Lincoln Powercraft 210 mig + dc lift tig, does everything I need for mig, and allowed me to learn tig on steel. Since then I've also bought a BOC Smootharc 185 ac/dc tig with foot pedal which is proving to be sweet as for steel and alloy. Nothing bad to say about either brand

bump

looks mint bro, shaved bays for all

Getrag 245 5 speed been sitting around as a spare, not needed. Unsure of k’s I have been told that this only fits the m20 engine, it has one bushing mount tab so only for older bodies as far as I know (not for e30) Includes clutch slave, fork and throw out bearing which feels nice and smooth Would need new seals as it leaked fluid out the bellhousing and output flange Pickup auckland preferred but can help arrange shipping if needed $500

So I think I'm actually 'done' with my car, as weird as it feels, I've nothing left on my todo list haha. Pretty stoked how its turned out and just enjoying driving the thing. Few photos Saturday night by @leebske

Where'd you get the rear bar from? Looks like a nice bit of kit

Maybe, I didn't find it bad, just hack the plastic shroud thingy til it sits nice and drill some misc holes, heres pic from my 21 Make sure to test it at the yard tho, cause they can often not work..

+1 for an e38 fan. Have one in my turbo e30 keeps things under control nicely, also put one in my e21 for the short time I had it and was mint. Like 20 bucks at zebra haha

Haha needle in a haystack. Good luck..

Finally someone who actually seems to know whats wrong with it, so much yay-say about this car. Good luck with the fix up

Ehhhm what you've pictured is the cradle with the fuel level sender. If you only need a pump you can reuse all that stuff. Post a pic of the actual pump

Do you need the whole cradle? Which is what you've pictured, or just the pump? I have a used facelift pump that was working fine, only took out to upgrade to higher flow

Cage now has 4 feet, 4 bolts each, goes in and out...but you have to know the right way haha. I'm going to cut the harness bar out and get a new one bent up, currently it sits hard up on the back of my seat so no good, then paint. Made backing plates for each leg as well, one happened go right where all the fuel lines are which turned a bit chaotic All painted up, same colour as car. Cut some carpet to clean up the rear seat area Now I REALLY need to dye/paint my front carpet.. Quarter bonnet, just because..

Haha yeah only reason I wanted one too at this point, hence the bolt in part

Well I bought this a while back for $103 lol. Cage wasn't homogulated and is too small diameter main hoop to get one now as NZ motorsport rules have changed since it was done. So it was basically good for nothing except for me to cut out and send to the scrappy...felt wrong to do but whatever haha Seatbelt mounts are undone as I'm currently cutting cage to fit properly and welding some plates on to make it bolt in, will fit with them in place when I'm done. Quite surprised how well it goes in and out seeing as its one piece. The bottom of the back seat will go in, back part would have to be hacked up....But in saying that pretty sure your not meant to have any rear seating in place with a half cage, I'll probably just make some nice covers to clean up the back area

Things in the works..

Ah so thats why I haven't seen you about haha

The one on the left is half the size of an M20 one, its definitely not the 'correct' one. You can use it and it wont have any problem, but just sayin.. Z88A as it says on it, is the full size one

God what an ache, feel for ya. Be good to see it on the road soon

@Kepes is that for a m20? kinda looks like you've been given the wrong one from Repco..