///MPROVD

to have a key coded to fit your car you have to get one from bmw and its very expensive but most locks smiths can make a key up for you just not a coded one

hey guys i need an smg pump for a e46 m3 if anyone has a good one please let me know cheers

hey guys i need some paint at least 2l of Sterling Silver metallic (244)?? im not 100% sure of exact colour number but yea if anybody has some extra or just lying around please let me know cheers

i dont understand are 318 lsd ??? are 6cyl 166 or 188 cheers

hey guys i recently read an post here but cant find it i was hope you could shed some light on this i read that a 318 e36 diff is an lsd is this true and if so will they fit into a 6cyl model and what are the pros and cons of this. ive heard this it true in the e30 models. so are they any good i find it hard to believe but hey i would love to be convinced otherwise besides who doesnt love lsd's haha cheers

are the 318is an lsd and are they any good on 6cyl models

cheers bro i have my own scanner just a cheap one ill scan it over again and check for faults are you ok with me testing with your afm if it works ill be happy to buy it off you and id be keen as to check out your supercharged e36 thanks for all your help

i have a aftermarket factory replacement one of the washable k&n type but not oiled or washed is there a way to test the afm

hey cheers bro ill give that ago engine temp sensor is located where? on the block? also would a m50b20 afm off my non vanos 5 series workCheers

hey guys i need some help/advice i have a e36 m52b25 325 the problem im having when i go to take off from a stand still i sometimes get a large lag as i pull away the motor seem to be be staved of fuel or something similar i also after a decent drive i remove the key from the ignition the engine seems to still want to run and dies at first i thought it was a fuel issue so i replaced injectors and fuel reg all fuel line i also replace the spark plugs and coils i checked all vacuum lines i still get the same problem i also have extremely bad economy like 300 km to a tank and the performance of the cars is less than satisfactory i have no idea as to how to fix this the cars still starts every time also this may or may not help but if car is in neutral and i accurate to over a 1500 rpm the revs rise with the accelerator and when i back off the revs drop and fall to about 500rpm and engine almost stalls and then rise back to idle plese help cheers jayden

so if im looking a simple toyota supercharger and bolting it to my 2.5 engine im hopefully not looking at a huge cost. i like the setup your running why did you use the electronics from the m52 intake, if i use a m50 manifold and replace all sensors as a straight swap from my m52 . Also is the ecu easy to remap. where abouts are you in nz i would love to have a look as im seriously looking in to doing this. and how did you go about mounting the charger did you have to move the oil filter or alternator the mount i see you used was this custom fabricated i appreciate your help im pretty much in the dark here i havnt seen any simlar setups around so tips are hard to come by cheers jayden

hey man just a few questions and looking at some options here for example im unsure based on your pictures i have a m52 are you using a m50 manifold or which is best, and in terms of electronics what did you use. Also did the headers you use come from a m3 and is this a significant importance in supercharging looking at doing something similar to my young m52b25 and maybe in future a s50b30 i just need to understand the hidden parts in this install i understand the process and the basics but im unsure as to the electrics if you used a aftermarket system or a piggy back or as simple as a factory remap and fuel supply i have a very big Bosch fuel pump that would more then put out but are new or bigger injectors needed im not looking to over boost this engine like your setup i want small boost pressure please help cheers jayden