///MPROVD

i did the seals on Sunday the oil did leak from the vanos but between the bridge and the unit not really sure what could be causing it maybe it is adjusting, hopefully haha thanks for the reply

hey guy recently changed my vanos seals in my s50 as they were leaking oil. Now im experiencing a strange idle problem since ive changed seals i also did a oil/filter change now the car idles still @ 650-700 rpm but sort of pulses almost? does this mean the cam could be stuck in a advanced stage or a retardant stage or im i just worrying haha? The seals that i removed were very badly damaged and i was losing a fair bit of oil now everything seems fine no leaking no loss of power nothing else out of the ordinary other than this idling fault any ideas fellas?

just replaced all the seals in my single vanos s50 successfully it wasn't too hard but it was time consuming havnt noticed much difference i had a small issue before with when the car was cold there is an small jolt when you start to accelerate but that has seem to of gone now. also pretty much every old seal was well destroyed

shouldn't be too hard to do just got to keep an eye on the oil pump orientation. might just have to mark it before removal

im replacing the seals in my single vanos s50 this weekend im using this wright up http://www.beisansystems.com/procedures/eu...s_procedure.htm

hey guys just got another coupe and found the air duct that covers the fan unit had fully rusted out luckily it hasn't damaged the fire wall anyway i need another one for a wof so if anyone is wreaking a coupe ive tried 4 doors and hatch the dont fit so need a coupe please let me know really only want to spend $20

have purchased one now thanks for the help

I'll take them providing you have the upper rear seat sides I've pm'd you

its pretty bad haha ill get pics asap thanks

hey i have a black leather sport seat set for an e36 coupe for sale the seats are in average condition the drivers seat is pretty crap it has rips and tear on the side bolsters the passenger seat is in pretty good condition it has slight cracking but very minor the rear seats are pretty much the same but there in a small rip in the back corner which is hard to notice the full set is for sale but it could be good to remove the passenger cushions and put on a worn drivers seat of your own or to replace some destroyed fabric seats ill try get pics up tomorrow $150 for the set will split if i have interest in the rears and the passengers seat i don't really care about drivers seat

the other center has no pinion gear so has no ratio

hey guys im after a cheap bmw i Only have 1500-1600 need it wof and rego dont really care what model just a cheap LEGAL runner less than 2.5 would be ideal anything out there ? thanks

i have a 3.73 med diff $50 and it includes an extra diff center

bump http://www.trademe.co.nz/Browse/Listing.aspx?id=600538050

turned out to be a faulty fuel pump i pulled the pump out and put it back in and it worked. the day after it wouldn't start it had intermittent start faults b4 but never didnt start i moved the relays around and it started again so i thought it must of been relay faults i also discovered that the power at fuse 18 only supply's during crank cycles i know that should have been more obvious but hey ive learnt now but the next time car failed to start when i put power directly to pump it would not run so i replaced it and has been fine since. thanks for the info

looks sweet bro great progress so far.

so $50 ??

50? but rules state a price must be added

hey im currently having troubles with my m3 fuel pump it all seems fine apart from power to fuse 18 i jumped fuse 18 with another live fuse and the pump powers ive replaced the fuel pump relay and still nothing so my question is what is fuse 18 connected too and why doesnt it have power ?

how much for front windscreen

not that long i wouldnt think. should be straight forward you might have to drop the drive shaft for more room but id give it a crack without doing that max an hour

how much for wheels ?

bump $50

230k approx

sounds good have you got an update keen to see the progress