petone

Just keep your money. If that $100 is burning a hole in your pocket then go and get a K & N flat panel air filter

FINALLY FIXED! Turned out to be the master cylinder, ian found me another spring and i got a recon kit from BNT ($25). Put it back together and now my clutch is back to normal. just hoping it stays that way...

how much are you willing to spend?

Dam- tuned length headers look cool

$1500! Dam thats not good.

what about adding door handles to that list?

I reckon those strips have saved my doors from so many bumps and scratches... Still if you wanna do it i reckon it would look quite good.

I'm sure repco sell special bits of wood for that exact purpose, wont be long before you see williams using wood on the F1 cars

I'm almsot certain that the box motronic, i'm pretty sure its got the motronic sensors on the side. The only thing wrong is one of the rear mounts was broken in the crash but it could possible be welded?

Most people on here look on trade me anyway. and your right, i do want them.

Tried the wreckers, they all wanted ridiculus prices as well, BNT have been the best so far, $100 + gst, my mates was cheaper than that though and a garage supplied his.

Recon kit wont work, i pulled it apart and the internal spring is in 5 different pieces. I got to get a whole new master cylinder. Whos the best to go see for a brand new one?

Didn't tane buy one ofr the master cylinder? Did you use it on the weekend?

Tim's right about the box's. Dave- the engine would be more suitable for parts or as a direct replacement if you already have a damaged 2.5 You might be able to use a loom from a 325 thats been involved in a really bad frontal crash or something though.

Had a decent look at the hydraulic system and couldn't see any leaks. I also noticed that when i put my foot on the clutch it would disengage as normal but after a few seconds it would start to engage again. When i look at the lsave cylinder i could see the rod was do exactly that, it was getting forced back. I replaced the slave cylinder and bled it and its still doing so its gotta be the master cylinder, i'll do that tomoro and see what happens.

Some parts off my mates car still for sale plus some other bits and pieces... M20B25- no loom but includes airbox and exhaust M20B20- includes loom and is complete but all the exhaust rocker arms have broken, don't know if the valves or pistons are damaged 2x 5spd E30 6cyl g/box, one is from 320 and other from 325i, 325 box has one rear mount broken, set of 20mm lowering springs Seats- blue clothe from a 2 door (rip in drivers but everything else is fine Blue vinyl door cards, 2 door again Various other parts also available, just ask.

Yeah, i know, i have taken them out of my mates car so i know how to do it. Is it possible to tell without having to take them out? What do the recon kits cost?

Stupid clutch isn't disengaging properly. Just started happening tonight. Slowly got worse and worse. There is still fluid in the reservoir. Pedal feels really wierd, sometimes car will stall and or wont moving when its in gear. To make it worse sometimes the clutch is back to normal, but normally the clutch will start engaging right as soon as i start to release the pedal. I'm assuming its either the master or slave cylinder. Is there anyway to tell what ones playing up or could it be something completley different?

Wierd, I thought all post 88 and onwards cars were facelift? still cool though PS sorry thats not about buying your car

Hell tim, can you even be near the car on full volume? My setup with just components up front and subs in boot is loud enough. Ollie, have you had a look at my setup? I'm real pleased with how mines sounding at the moment

Yeah i also like the wheels, What are they? I'd only lower the front a little bit more, otherwise you start scraping on stuff.

Na don't bother with back speakers. I wasn't sure at first but i like it better now with no rear fill. I'm just going to put the factory grills in place with no speakers in to let a bit more sound thru. Just get a sub in the boot and some decent comps up front and your sorted. (Get a good headunit as well of course)

For facelift or prefacelift? What about other models?

He has to install the alarm anyway, the alarm doesn't need anything extra to work with the central lock. i just take the wires from the actuators to the right kick panel and he will wire it all up. Simple. What else would i need from my mates car?

wrong, wrong, wrong.