Hartage

You have to swap the black plates over, drill the copper coloured "rings" that hold it up. There are also 4 ( i think ) screws that are hidden in the foam padding.

Done two, no real issues, you do nedd every thing, including the tin plate that the electric motor is mounted on, needs a drill to remove the roll over rivet, then as said before its follow the way it comes out of donor car.

Dont want to sell any of the ACS ? Looking for 2 16" ones for mine!

^^^^ Nope not legal, needs to be fixed so they wont come off.

Hi, Does anyone know this car? Or is able to have a look at it? www.trademe.co.nz/Browse/Listing.aspx?id=227870760 Ta

Have had both 4 and 6 cylinder manual cars, never noticed a differance between them!

^^^^^ Correct! 2 seats at the rear only. :thumb:

Ban it!

^ You can use all pedals etc. Gear box is differant so that will include all clutch and flywheel as well as not useable. Sway bars, mounts etc all same ( rear was 325 any way and front as well?? ) diff if its the ratio you want.

^^ Just lift the rear tray out and they are centerd behind rear head rest if you have them, or center of the seat on each side.

Once more in english that we can understand! Please!

Not sure if this is what you mean, But there is in all e30 2 and 4 door cars 2 threaded holes in the rear parcel shelf that are there for car seat anchor pionts. Have 2 fitted and used in my partners car. Hope this helps

I Have a cabbie that i am in the process of fitting M3 seats into, the cabbie seat does not have the sides out past the back rest. Needs to be about 100mm wider on both outer edges. This is the bit that the hood goes into when folded down and the hard cover closes on.

Will an e30 M3 rear seat fit in a 4door standard e30? Yes they will> I have M3 interior in my 325i e30. Just have to change the rear seat belts to 2 seat ( remove the center one ) as the seats are not made to have 3 people on. Cabbie rear seats will not go into coupe, not wide enough, fronts are the same mounts as all other e30 seats.

M44 motor, out of e36 318Ti, 150kms was running well when car was damaged and written off. Complete with all electrics, manifolds etc. Open to reasonable offers

Well done! Got a sneak preview of the car this morning and a Quick ride up the motorway. Sounds fantastic!

Done!

Yep its a bit of a drive, but if nobody else is about I can have a look, am going to be up that way Probably Thursday evening on my way to taupo.

What are you looking at? Am in Hutt Valley, and could go see it for you. Are you in a hurry to know about it? Know most about 3 series, e30, e36 and e46. Ian

Interesting, I was not aware that 330i's were made in 2000. I have 2000 328i Manual in red with black leather and body kit with 112k on it. I looked at an M3 e46 at the Lower Hutt branch of the same yard, they offered me 10k! as a trade on it.

Nice Job! Was it a simple fit up? What model SAAB did it come out of? Does anyone know if they are the same as e30 roof?

Nathan, Rear sway bar mounts to the rear body, upright to the body, arms lead forward to the front of the car. Should be 2 screw holes and 2 slots for the clamp plate to locate in. If in doubt you can come and have a look at one of my cars!

Happy Birthday ya old bugger!

Got one in Lower hutt if you want to check it out! Home tomorrow evening! Ian

I have one, Lower Hutt!! text me on 0274458007