BM WORLD

most things on the e34's are pretty easy to sort . the main problem is the auto trans if it craps out will cost a fair bit to sort or just chuck another used item in . v8 engines dont give much problem , just make sure on any of these cars that the coolant system is all good and replace any old hoses , thermostats ,viscous fan clutches etc . dont over heat any of these engines . m30 535i engines will be due for a new head gasket soonish if not been done already also check for front lobe camshaft wear due to lack of oiling . brakes , diffs , axles , driveshafts , hubs etc give very little problem , front and rear arm ball joints and bushes all wear out but easy and cheap enough to replace . most of the interior electrics are pretty good with the odd well known problem which would be easy enough to sort . 535i 5spd is a good way to go for cheaper maintance , have a nice 1990 535i b10 alpina replica for sale if interested only done 90,000km but will be a bit more than our budget. but either way they are great cars

should have called me could have helped you out with a good battery. pleased to hear you sorted out your cd system:)

those prices are ok . we sell used hoodlinnings , and every now and then we get one in thats just been redone , is your e36 a coupe or sedan

should be 7" front and 8" rear. have seen others sell for less with no tyres and others sell for more with good tyres

yes sounds had it now . its a comon way they go . we have some good used trans if needed also we have a guy that rebuilds on site etc . or maybe go for a manual conversion etc

my mate has a set sitting in his shed a bit like this black and red.

hi , yes you know where to come

just buy this and redye it . http://www.trademe.co.nz/Trade-Me-Motors/C...n-299144570.htm

have some average ones also

should be 225/45-17" on a 8" wide alloy

or 20" on a e38

do you have a pod type or k&m panel type filter , as these let a fair amount of dirt through which stuffs up afm's

might have some options 021433600 cheers

yes can do

does the car have a alarm fitted??

what fuel do you use ??

RUSTY or REALLY RUSTY (hidden under bog) dont get a uk import .(probably only choice in your price range though) as david said get 1984ish onwards built on e28 platform so easy to get mech stuff , suspension etc . front wings cost more a $1500 EACH NEW , compare that to tidy second hand e28 wing $100 etc

do you have some pictures , might know someone who is after parts from a red 528i etc . yes and dont remove abs from your 535i .

you are welcome to tow it down to work and get it up on the hoist if you like . cheers brent

about $250 for 16" by 8" ones. cheers brent

clutch pedal maybe normal height , or double check and rebleed the system good work though , have you driven it yet??

just a small sample of the wheels and tyres we have at european car parts http://www.trademe.co.nz/Trade-Me-Motors/C...n-297987555.htm http://www.trademe.co.nz/Trade-Me-Motors/C...n-297988618.htm http://www.trademe.co.nz/Trade-Me-Motors/C...n-297989476.htm http://www.trademe.co.nz/Trade-Me-Motors/C...n-297600627.htm http://www.trademe.co.nz/Trade-Me-Motors/C...n-297788569.htm also plenty of other types std 14" 15" and 16" etc for 3 ,5 and 7 series

you can do either e34 or e28 loom ecu etc on either engine . holes can be drilled into the gearbox sensor castings , easy job had mine done by baverian motors i have low cost gearbox if you need one .

my mate has these make an offer. you would probably get them for $500 http://www.bimmersport.co.nz/forums/index....8&hl=hartge

washer pumps offen fail . also in the e39 the hoses split and leak etc