BLACK DORIS

Sorted. Embarrising how simple that was. Thanks again. One question I did have - from the quick search I did online I think the hose from the injectors connected to the fuel flow/pressure regulator??? Anyway, that whatever it is seems, (on mine at least) to be free floating. Should it be attached to something (a bracket?) in the engine bay? Even with my limited mechanical experience, that just seems odd. Thanks again, btw the new site upgrade is great.

Hey Andy/Ben, Thanks for the info. Only thing I wasn't sure about was air in the line, didn't want to cause a bigger issue. Hose and clips are for fuel injected. Will give it a crack! Lol. Thanks again.

Hey there, wondering if any of the Rotorua based members are in town and could help me replace a leaking fuel hose (e30 325i/engine bay hose). Just discoved it today after arriving. I've bought the new hose and clips (seems leak is only the hose that connects to the injectors). After a quick search online, am thinking this could be a little bit above my skill level - well making sure there's no air in the line etc. Plus I have only basic tools (and skills!) here. Have taped hose and that'll prob allow me to get to someones workshop, think it's more pin hole leak. Anyone able to help out or point out a local mechanics that may be open tomorrow (optimistic...)? Flick me a txt if your able to help out or know where I may find some tomorrow 0212133565 and what flavour beer you drink. Thanks in adv, Rio

Hey there, wondering if any of the Rotorua based members are in town and could help me replace a leaking fuel hose (e30 325i/engine bay hose). Just discoved it today after arriving. I've bought the new hose and clips (seems leak is only the hose that connects to the injectors). After a quick search online, am thinking this could be a little bit above my skill level - well making sure there's no air in the line etc. Plus I have only basic tools (and skills!) here. Have taped hose and that'll prob allow me to get to someones workshop, think it's more pin hole leak. Anyone able to help out or point out a local mechanics that may be open tomorrow (optimistic...)? Flick me a txt if your able to help out or know where I may find some tomorrow 0212133565 and what flavour beer you drink. Thanks in adv, Rio

Off topic, but a welly bimmersport golf get together sounds like a plan for next summer/end of the year. Got an old set dropped off at the start of the year so should be ok by Nov/Dec. Lol. Not sure I can make this w'ends meet. Hope it goes well. Apology in adv for thread steal. Wagon looking good Brent.

Bimmersporter... http://www.stuff.co.nz/stuff-nation/813902...-m-a-bimmer-nut

Looks nice!

Attention grabbing...

Gas even shorter... How did it handle? Look forward to seeing and hearing that in person. Nice.

Slightly OT. I've often wondered what happens with repo vehicles. I'm guessing they go to auction but can they be auctioned for more than the outstanding amount owing? If so, does the extra $$ go to the former owner?

How did this go? I just had bearing and break lines replaced. Found a similar issue only on the right front disc, minimal but would interested in getting a mobile guy in. Cheers

Nice!

Bummer. Were those 15's? Am after a centre cap... Cheers Rio

So who gives way at a round a bout if/since everyone's turning left... I'm guessing nothing changes but the thought did cross my mind.

Slightly off topic. Would the centre cap off a 5 (e34/39) series 15 inch weve fit? Wouldn't the centre caps be the same? If so, let me know I'd like one! Or to buy a 15 centre cap from an e30. Cheers.

Maybe Ray and the hell crew could aquire this and give it a lot more power...

Not a bad idea. Would be good to have a donor...

JKSE needs the 'his' and 'hers' combo for sure. Upsized.

http://www.trademe.co.nz/Browse/Listing.aspx?id=445000802

you've got mufflers growing in that lawn...

That'd be great. Cheers!

Am also after one! Some f*#kwit took one on sat night... Apols for thread hi-jack. Cheers!

update...

Wasn't APT looking for a wagon?

lmao