Jump to content

JFry

Members
  • Content Count

    323
  • Joined

Everything posted by JFry

  1. ^+1 Definitely transforms the whole rear of the car Cheers Nick e: about as good as I've got Lucan
  2. You'll need to get someone to 'uninstall it', if you just rip it out the immobilisers etc will still be active unless you return it to stock (and can remember how it was)
  3. Easiest way is if it's making a noise. You could also check the piping for leaks etc. If you're getting a little bit of water each time i'd say it's losing pressure somewhere.
  4. JFry

    HB Nick (Nick021)

    HB Nick, have a good one
  5. welcome and good luck with getting it sorted
  6. Yeah, I would put money on the wire not being there. Would be easy enough to run a wire from the right to left.
  7. JFry

    Quick Questions

    ^Is that not the anti rattle clip? (I could be wrong)
  8. If it's a jap import it would have come from the factory like that. Mine is the same, you only really need one anyway....
  9. 17" alpina reps, about 5kgs heavier per corner @Mark, yeah, was more worried about the fronts, but the trans is buggered already. Would give me a good excuse to go manual sooner
  10. Set of 4 16x7 (et in region of 46 i believe) 225/50/16 tyres with approx. 4-5mm tread left, even wear etc. These have been sitting in my room for a couple of weeks and I'm not likely to use them again. At this stage I'm after about $500, not really sure what they're worth. Someone take them off my hands before I use them for the Taupo trackday and ruin the tyres
  11. +1, good on ya for giving it a go yourself
  12. Bootlip spoiler My favourite mod so far. (After wheels, but they weren't so cheap )
  13. JFry

    Project M325i

    Stunning!!! I'm jealous, nice work
  14. JFry

    Front Drive BMW ?

    ^^ indeed. I'm with Brams on the best looking in ages aswell, would love to see an M version
  15. Color combination looks wicked, welcome to BS
  16. JFry

    Buy my crap

    So the CD43 is for an E36? Would it be plug and play for a jap spec car?
  17. Everything I'd want in an E36...
  18. It'll just be getting the right wire to solder it to. Sounds like you got the wrong one the first time, they are fairly confusing when you look at them.
  19. They only came with the 6 cylinders.I would pay about 3.5-4k for it though.
  20. JFry

    GM 4 Coding?

    I would assume it does, more here.. From reading through this dudes site, the GM 5 needs coding, and they are fairly similar...
  21. JFry

    My 1971 2002 Build

    Looks awesome mate. Bet you're stoked with it
  22. The economy run they didn't air
×
×
  • Create New...