WYZEUP

add one more zero 2,980,000 yen ......just over 40k. i would have bought it if it was only 4k

Stumbled across this while trawling through some japanese auctions. looks like a nice example....pity they didnt use the newer motor like HellBM

http://www.moderno-zing.com/stock/bmw　130i-mスポーツ　v8e39エンジン公認/

I think he means speed bumps, at crossing and car parks....

Uggggh I'll add it to the list ?......im just happy its running faultlessly at the moment. 

A couple of really cool conversions i stumbled across last night. They are too cool not to share. @_ethrty-Andy_ some ideas for the future of the transit?

Really cool converted 635i

contact these guys they may be able to help you if they don't already have it in stock

http://lemansautofabrics.co.nz/fabric-bmw.html

most people use e36 tie rod ends

On 8/17/2018 at 8:56 PM, Allanw said:

You mean instead of sticking on some crappy chinese ebay parts, and big wheels... making it marginally slower than a normal one

it may have "crappy chinese ebay parts" but its the suspension and handling that were the main concerns for HSV, hence the decoupling rear sway bar (which is unheard of in a ute) upgraded shocks and springs, wheels are no bigger just wider, from a 7.5" to a 10" wheel

On 8/14/2018 at 8:19 PM, treone said:

@Gabe79 - at last something we can agree on ☺️.

This is what HSV should've done with their Supercat version of the Colorado. Hope they get it right with the Camaro...

The camaro will come as spec'd out of america, being the 2SS will be very well spec'd unfortunately no manual at this stage currently

I run the srs bushes and they still dont centre the hub with standard e36 arms, if you use m3 hubs it may work.

Theres quite a few options out there for this now, theres a guy in oz that has built some that he reckons works with standard arms. try the e30 enthusiasts australia page he posts a bit on there

Hey guys,

Looking for a Motometer facelift SI board, have discovered that my current one has been damaged by screws, hence has caused my rpm gauge to stop working

WOF and a wash ? first time its been out in 4 months 

Does anyone have any wheel dollys in the wellington region i can borrow/rent for a weekend?

getting expensive these days......

https://www.r3vlimited.com/board/showthread.php?t=423545

go to a model store they sell translucent colour paint in small spray cans

how far do you want to go? i did it in my car. not extreme but a tidy finish.

Re-routed headlight loom through inner fender and plates in the wheel well's etc...

On the look out for a e36 6 cylinder fuel pressure regulator, any help?

So ive finally tracked down a radiator for my car....reading all these opposing comments all over the web about what to run in them etc....

I understand i should either be using pre-mixed coolant or mixing coolant with distilled water?? 

Im assuming filtered tap water is still not efficient enough, are there any other things i should note when fitting?

Is alloy block/head to alloy radiator

Thanks 

Thanks BMRBOI but im after the non-expansion tank type radiator

Hey guys,

Im on the hunt for a alloy radiator for an e36 6 cylinder, non expansion tank type.

Before anyone suggest fenix radiators there are none in the country for another two months i have already phoned them.

Thanks

bump

bump

bump

$100 need to clear out the garage now the cars leaving. 

Sorry i ran out of time. from looking at realoem, the caps look way different. ill see what i can arrange

Bump $150, need them gone. pick up in hamilton