WYZEUP
-
Content Count
727 -
Joined
-
Last visited
-
Days Won
7
Posts posted by WYZEUP
-
-
contact 41 degrees in wellington, he can make to whatever spec you want and he's local, he built my lips for me and provided a really good service and finish
-
Waaaaah i just want those wheels!!!!
-
I do have a full set of extended bolts
-
How many spacers do you require? i have a pair of 15mm and a pair of 20mm spacers, hub-centric....will need to check on bolts but may have some in the shed. $200 for the full lot (4 spacers & 20 bolts) but will need to check the bolts
-
There was an e34 535i on trademe quite cheap the other day.....might be an opportunity to have a look at it
-
If the rails are unmodified then you wont have a problem with wofs etc....
-
Oh yip i know the parts, i think i may have them in my garage
-
which mounts are you talking about? the ones at the bottom of the radiator?
-
yeah this is what i think i will do and then assess the situation from there
-
Am going to teekay test the vehicle tonight and see how it goes, but after a lot of reading what i am seeing is the water beginning to boil because the system is no longer pressurised.
Seal it up and try it is the only way.
-
Sounds very similar to mine so may seem that the problem i am having isnt actually a problem. I havent put coolant in yet as i dont want to be wasting coolant spilling it all over the place haha.
So think i will just put it all back together and fill with coolant and test the system out properly. fingers crossed.
-
I was wondering if it could possibly be normal. The water is reaching almost 100 degrees by that stage.
being an m60 it doesn't have a bleed screw, I wish it was that easy.
am running a custom expansion tank in the battery tray (e30)
-
So removed the thermostat and ran the vehicle up, not until it gets to half way on the gauge does it push a whole lot of water and air out???? so im lost......
It has been suggested cracked head???
Anyone have any insight? or just still not bleeding properly
-
It has been suggested to me to remove thermostat and check system condition that way as well?
-
So i am getting to the end of my build. Well im hoping......
So i have pieced the cooling system all together, custom alloy expansion tank, feeding into the rear crossover pipe, z3m radiator, 80 degree thermostat, everything was new when i put the motor back together.
Motor is a m60b40.
Have filled coolant from tank and once thermostat opens blows water out like a whales blow hole.
Tried filling from the top radiator hose and blowing onto the top hose to try and remove air....still does is.
Checked thermostat vent is at top put all back together, filled through reservoir, blew through feed tube from radiator to resesrvoir still a lot of pressure.
Is only when thermostat is open?
Anyone had experience with m60 cooling systems? i dont want to think the worst of it being a headgasket, there doesnt seem to be any mixing of oil & water but im also no mechanic....
if anyone could shed some light would be a massive help, is one of the last hurdles before i can start test driving.
-
Thanks guys, hopefully it might have it almost complete by the end of the weekend, have fitted appropriate sized tyres to the wheels for better fitment and more tyre to road size.
Should have some more photos shortly
-
-
It will give you an idea of how much further they will stick out from the wheels that are currently fitted to your vehicle so you can then get a measuring tape and go outside and have a look for yourself.
Question? why are you fitting 20" tyres to 19" wheels?
-
How much are you looking to spend?
-
Call Kerry at mosen euro parts he may be able to help you out
-
If that wont pass a cert i am definetly not going to pass with the v8 in a smaller body again. I am using e46 325i front discs and caliper (300mm) with ebc red pads, e30 stock rear calipers with ebc red pads, stainless lines and racing brake fluid.
you would hope the setup you have is big enough.
-
1
-
-
do you mean the bump strips on the doors?
-
It left the garage under its own power whoop whoop!!!!! so stoked.
A few little things to rectify that i overlooked when building the expansion tank, regular radiator caps dont hold enough pressure for the system and need to relocate the outlet as its sitting too close to the firewall.
Unfortunately it wont stay at this height as exhaust clearance is very minimal so will look at a larger tyre and raise the suspension more but still keep the fitment nice.
Getting close now, really starting to like the look of the two tone!
-
2
-
-
Living in wellington
in Off-Topic
Posted · Report reply
So it seems that there is a fair chunk of the community here residing in wellington.
So though i would ask here for some opinion....I am currently working on moving to wellington from the lovely city of hamilton.
The job i have applied for (all going well) is in lower hutt but my partner works in the CBD and currently lives in newtown making everything easily accessible for her so keeping that side of things would be handy as she is unable to park in town. I also need garaging for the 30.
So im looking for opinions on optimal suburbs to look at for renting a suitable property that has garaging, is close to public transport and a safe area.
Will be looking in the next couple of months to move, any help would be awesome as i dont know the area very well at all.
cheers