4DoorE30

Are the details listed somewhere? Im looking for a cheap wofd/regd one.

Looking to buy a E30 325i preferably automatic and 4 doors.

If got one, in tauranga. Pm me if your interested

There pretty easy to find, I think the diff might need to be changed but i havent drivin mine yet so im not 100% sure. Yea the driveshaft bolted right upto my one.

Im also just about finished an m50 swap, using a Getrag 220 form an e36. I found it very easy to make the box work. Just cut and re-welded the shift linkage, and my driveshaft bolted right up. The e30 was originally a 320i. Im not sure what box you have to use when using the m3 clutch but hopefully this helped.

I can do the ECU and Lead set. Ive got the loom aswell but I Took the main power cable that goes to the alternator and starter off it so not sure if youd want that.

Jamex super lows on standard shocks

Hi guys, im in desperate need of the section that comes off the exhaust manifolds form a e36. Ive got the m52 steel headers in my e30 but I need the flanges with some pipe on them to join up to the rest of my system. Need ASAP as my car is currently at an exhaust shop but they need this part. Closer to tauranga the better Thanks heaps

I can do the throttle body and ICV. flick me a text on 0275711005 if you want them. Not to keen to pull the head but you could have the whole motor for the same price as you'd get a head for. Just need to get it outta the shed for my old man haha

Ive got a full m20b20 PFl in tauranga for cheap as chips if you want it

Want to Buy M52 Headers for my e30 swap, Preferably in the Tauranga area. Thanks in advance

I have one in my car at the moment but Im about to pull it to do a m50 swap. It has an external oil leak from the headgasket, i.e no coolant and oil mixing. I can sell it with everything including all accessories and motronic 1.3 ECU & Loom. If your interested drop me a pm or text on 0275711005.

Just thought I would share some photos as im very happy with the result from using Meguiars Wash & Wax today.

Ive got a m20 sump guard. $150 in Tauranga

pmd

pm'd

How much for the extractors, shift boot and tech 1 wheel?

The blue leather seats are in very good condition

Hi guys, ive got a e34 525i(m20) with a blown head gasket or cracked head. It is going to be deregistered and sold for scrap metal next week so if anyone wants any parts from it let me know. It is in Mount Maunganui.

Hi mate, Ive got factory front and rear springs from a 320i sedan if you want them. No shocks or anything though. Tauranga

^^Do This, It is real easy and is much better in the end. I can help you with any information needed.

Hi guys, I have pulled my m20b20 from my PFL l-jetronic E30. -I have a m20b25 from a PFL 325i (no loom) -I have the ECU from the same car (073) I am currently under the assumption that a 073 ECU is motronic 1.0, Although this seems to be debatable. My ECU has only 2 rows of pins not 3 like you find on motronic 1.1 and 1.3. The easiest option seems to be buying a motronic 1.0 loom, however I am unsure if my gearbox has somewhere to mount the two sensors in the bell housing. Does anyone know wether the l-jetronic cars have the mounting holes for these sensors, or a picture of what they look like? If my gearbox doesnt have provisions for these sensors, and if my flywheel doesnt have the required tab. Is motronic 1.3 an easy upgrade? Any input is much apreciated.

HI guys, I pulled the m20b20 from my prefacelift '87 e30 today. I believe it is running L Jetronic. My new engine is from a 325i E30 which was Pre facelift aswell, however I think it was a motronic car and it did not come with the wiring harness. Both my ECU's have two rows of pins, however they are different sizes so wont connect up. Please correct me if Im wrong but I think I need a motronic 1.0 wiring harness and I will then need to change some of the wires in the c101 plug. Need the harness asap, Im in tauranga but am willing to pay for the harness and postage.

bump

Thanks mate