modz

WTB per title, after the plastic frame that holds the shift boot in a manual E46 bmw. Doesn't appear to be sold anywhere as a separate part (?) Thanks

Thanks, yeah box is out; I'm keen to do this correctly and get it checked / correct before it goes near going back in the car.. It's now at the Gearbox Factory for a proper inspection.

Thanks AllanW the box is not in the car but the shifter sits way over below 5th in its neutral position and wants to stay there while bench testing. It is the correct 5speed box model for the car, had it come from the factory in manual and using all new OEM parts for the rest of the conversion, so it’s being done properly. On the plus side, the shift gates are much improved since doing the detents. Taking it in today to get looked at; want the conversion all done by end of Jan all going to plan. I’ll update this post with info to help others out should they have the same issue.

The two detent pins (5th and reverse) impact how easily the shift occurs into the gate and in turn position of the shifter. http://www.m3forum.net/m3forum/showthread.php?t=385063 http://www.bimmerworld.com/Driveline-Shifter/Transmissions-Accessories/ZF-Transmission-Detent-Repair-Kit.html

So I spent all afternoon replacing the 5th and reverse detent springs, replaced one at a time to ensure part and direction match for the replacements. However the shifter still leans to the right - highly frustrating. Any tips, tricks or thoughts? Would the box being super dry of fluid make any difference? TIA

Hi team does anyone have a 10 spline (std ZF manual) clutch alignment tool I could borrow and return mid Jan?

Anyone have a spare plastic clutch alignment tool I could buy? Cheers

Cheers Gabe will keep that in mind. Ideally need some before then so I can do it in my holiday. The fan/clutch is still here when you’re ready too

Managed to forget buying new flywheel bolts in my last FCP order. Any good local sources for new ones that would have them in stock? For a challenge, they are the 22m for a single mass f/w, not the standard 28mm... https://www.ecstuning.com/b-genuine-bmw-parts/flywheel-bolt-priced-each/11220616143/ TIA

I’m wanting to clean my m54 engine of old oil and dirt gunk before reassembly. Mostly because I hate dirty stuff, but also because I might as well having removed this much off the engine block! I have the inlet ports blocked with rags, but given the engine is on an angle what have others done/used to clean the head area particularly? TiA

Well I bit the bullet and purchased an RHD flywheel. Arrived on my doorstep in 3 days, machine work looks excellent and was well packaged. I bought the heavy duty version that bolts up to m54 directly, using an m30 based clutch. Sterling auto& clutch will have my clutch ready for pickup tomorrow. Aiming to install in Jan once all the other parts arrive. Will update further then Thanks to all who offered advise

Very good point. The Valeo kit is the same / similar weight as the DMF - which to me negates the point of going SMF. Since my initial post I've been reading more about the Sachs/FX SMF which is closer to 7 kg https://gripforce.com/sachs-oem-clutch-kit-and-flywheel-bmw-323-325-328-i-is-m3-z3-m-e36-525i-e34-528i-e39/

Yep specifically single mass as it will be a track day car most of the time. Thanks all for the insights so far. FCP sell Valeo so looks like that's the go. Hopefully customs don't sting me too much!

Anyone had experience buying from local or international suppliers for single mass flywheels? specifically looking at one for my e46 m54 most packs seem to be $1200 with clutch opinions and experience with vendors or kits appreciated TIA

Cheers Graham, that's just up the road from me so I'll drop in and have a chat

I’ve used GT Refinishers in the past for custom work (metal work & paint) but wondered if anyone else came recommended? Must be able to metalwork, not just attach new panels... TIA

For those interested a brand new cowl unit is $70-90 usd from either FCPeuro or ECS.

Worth a shot. Probably more likely under Classic Cover, which has similar stipulations tho.

Well done on the project and the detail, following this with interest. Once my E46 coupe may end up getting a V8....there are so many nay-sayers online in regards to it not fitting purely due to the sump, which does seem a cop out

I insure my project E46 coupe through AA classic cover. $84 per year as long as it's in a garage or similar. All you have to say is that it is in storage, that it is being restored and that once back on the road you'll be driving less that 5,000km per year.

Anyone have one they want to sell? I realise they can be had brand new for $1-200, but thought I'd ask on here first.

Thanks, really after full leather Sport type's as I have half/half at the mo

After a set of E46 coupe seats, MSport (not standard CI) in black leather From memory these were all electric If you have some in other colours I may be interested, will consider fronts only. Thanks

Per title I need a Right front guard/fender for a prefacelift E46 coupe Really want Cosmos (black met) so I don't have to respray thanks in advance

Thanks team, I'll start with the barrel fix and go from there